International Daizen Control Arm Kit
12-18-09, 01:41 PM
#1
Pole Position
Thread Starter
Join Date: Sep 2008
Location: Birmingham UK
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Daizen Control Arm Kit
This isn't 100% for sale yet but I know alot of you would want it,i'm over in the United Kingdom but can sort posting out to you etc etc.
PLEASE NOTE - THIS DOES NOT INCLUDE THE LOWER CONTROL ARM BUSH
The kit however does contain everything else,all remaining bushes and all of the grease that was originally supplied with the kit. They look rusty as some rain fell into the bag when they where in garage,but they're fine just need a clean,can provide pictures.
The kit i got was for the 2000 - 2005 GS's
I'll know for sure if i'm selling them by monday,would want in the region of $75 + postage for them.
Leave post's or pm's please,if sale is confirmed will be given to the first person to leave message/pm
PLEASE NOTE - THIS DOES NOT INCLUDE THE LOWER CONTROL ARM BUSH
The kit however does contain everything else,all remaining bushes and all of the grease that was originally supplied with the kit. They look rusty as some rain fell into the bag when they where in garage,but they're fine just need a clean,can provide pictures.
The kit i got was for the 2000 - 2005 GS's
I'll know for sure if i'm selling them by monday,would want in the region of $75 + postage for them.
Leave post's or pm's please,if sale is confirmed will be given to the first person to leave message/pm
12-18-09, 01:59 PM
#3
Pole Position
Thread Starter
Join Date: Sep 2008
Location: Birmingham UK
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
thanks,but no that wasn't me,i've only got a GS300,gotta be a lucky guy to have an Aristo though,GS is going to fund this,details here : https://www.clublexus.com/forums/gs-...to-an-end.html
Trending Topics
12-23-09, 05:15 AM
#8
Pole Position
Thread Starter
Join Date: Sep 2008
Location: Birmingham UK
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
this should clear things up,it's the bush that in OEM spec has the metal sleeve that also needs to be taken out,in these picture's you can see which bush i mean and which control arm i'm also on about
https://www.clublexus.com/forums/sus...aizen-diy.html
https://www.clublexus.com/forums/sus...aizen-diy.html
12-23-09, 10:02 PM
#9
Lexus Champion
iTrader: (6)
Join Date: Nov 2002
Location: Mississauga,Ontario,Canada
Posts: 3,488
Likes: 0
Received 8 Likes
on
8 Posts
Not really since he replaced all of them ?
The caster arm runs from the hub to under the driver/passenger footwell.
The lower control arm runs from the hub towards the engine.
The caster arm runs from the hub to under the driver/passenger footwell.
The lower control arm runs from the hub towards the engine.
Someone must need the Daizen kit for there GS..
12-24-09, 03:58 PM
#11
Pole Position
Thread Starter
Join Date: Sep 2008
Location: Birmingham UK
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
sorry meant to say the bush that he shows he removed with a handsaw and then pressed the others in himself
it is the caster arm bushes that I have used on my car already
and indeed there's always people wanting them,and it's very cheap!
it is the caster arm bushes that I have used on my car already
and indeed there's always people wanting them,and it's very cheap!
Thread
Thread Starter
Forum
Replies
Last Post
prichmon
LS - 4th Gen (2007-2017)
1
03-18-19 08:25 PM
GS3ooMania
GS - 2nd Gen (1998-2005)
11
03-11-11 02:34 PM
