CA WTB Air suspensions
#2
Lexus Champion
iTrader: (1)
if you're interested, i have:
-a set of the Tein CS v.2, bought direct from our forum sponsor Carson Toyota (1,500 miles on these coilovers. yes; 1,500 not 15,000)
-4 new UAS Aerosport bags direct from UAS
-all the UAS brackets to mount the Tein CS with the aerosport bags, into the GS
-a gs OEM woodgrain center console with 8 buttons already custom mounted for ride height control
-a digital pressure/height gauge you can mount anywhere you choose, with included wiring
-the firestone/Airrunner compressor that comes standard with the Airrunner kit
-an Airrunner 5 gal. air tank
-the Airrunner chrome "toppin" plate that the Airrunner compressor and tank mounts to. this fits your whole air setup conveniently in the back of your gs's trunk and still leaves pretty much the whole trunk open for storage space
-a full set of valves from a very reputable company, already mounted and assembled/wired to a board you can mount wherever, in your spare wheel well or any other location you decide... (after running a system check, we've found one of the blitzluft valves needs to be replaced, itll cost you $20/$30..chump change to have a pre assembled setup which is otherwise ready to bolt in...)
lemme know if you're interested... if i could sell this all as a package deal id be a lot happier and possibly more willing to work out a discount.. just keep in mind the Tein CS v.2 is selling new now for $1500+/- so that should give you an idea of what this whole setups worth.
-a set of the Tein CS v.2, bought direct from our forum sponsor Carson Toyota (1,500 miles on these coilovers. yes; 1,500 not 15,000)
-4 new UAS Aerosport bags direct from UAS
-all the UAS brackets to mount the Tein CS with the aerosport bags, into the GS
-a gs OEM woodgrain center console with 8 buttons already custom mounted for ride height control
-a digital pressure/height gauge you can mount anywhere you choose, with included wiring
-the firestone/Airrunner compressor that comes standard with the Airrunner kit
-an Airrunner 5 gal. air tank
-the Airrunner chrome "toppin" plate that the Airrunner compressor and tank mounts to. this fits your whole air setup conveniently in the back of your gs's trunk and still leaves pretty much the whole trunk open for storage space
-a full set of valves from a very reputable company, already mounted and assembled/wired to a board you can mount wherever, in your spare wheel well or any other location you decide... (after running a system check, we've found one of the blitzluft valves needs to be replaced, itll cost you $20/$30..chump change to have a pre assembled setup which is otherwise ready to bolt in...)
lemme know if you're interested... if i could sell this all as a package deal id be a lot happier and possibly more willing to work out a discount.. just keep in mind the Tein CS v.2 is selling new now for $1500+/- so that should give you an idea of what this whole setups worth.
Thread
Thread Starter
Forum
Replies
Last Post
TheBosSC4
SC400 / 300 Classifieds
9
08-29-11 07:13 PM
sushimi
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
3
05-06-10 10:08 AM