4play4dr

NVM..jus gonna take it to a muffler shop

Ay-nako

iTrader: (25)

hey bro ive got my whole old stock exhaust set up on the side of my house, only thing is that i removed the resonators and it has straight pipe, i dont know how you'd pick it up or something but id take 75 bucks for it

pingu

You are looking for the B-pipe if you have a GS300. I think the GS400/430 have an X-pipe

4play4dr

okay..so..ive never seen what a stock exhaust is supposed to look like..but it seems there are 3 parts to it? from the header to the y-pipe..from the y-pipe to the axle backs..and then the axlebacks right? the pipe i need i guess is the one from the header to the Y-pipe..

header>A-PIPE?>Y-PIPE>splits into two axlebacks...is this correct??? also..if anyone has a picture of the underside of the car..so i can point it out better..that would help too

dRo15

iTrader: (10)

check out the junkyards in Chula Vista. They post up on craigslist for parts all the time. Just give them a call so you can get your parts and put your exhaust on.

dRo15

iTrader: (10)

Here you go. They both have a GS in their yards.

Advance Auto Wrecking
777C Energy Way
Chula Vista CA 91911
(619) 216-6012 M-F 8-5, Sat 8-3.

PACIFIC AUTO WRECKING
795 ENERGY WAY
CHULA VISTA CA 91911
619-216-7866

pingu

Read post above. It would help if you stated which model GS you have. The 300 has a b-pipe because there is only 1 exhaust manifold. 400/430's have 2 exhaust manifolds and have a different pipe.

What you could also do is just cut the weld where they come together. Seems weird that they are all welded together....

4play4dr

yea..mines a 300..so i guess jus one pipe? i was looking on craigslist earlier too and saw those..ill have to give em a call and ask how much it might be..dont wanna drive down for nothing..its a good 30mins drive for me

ay-nako..where u located?

dRo15

iTrader: (10)

^^^ he's in Vegas.

4play4dr

oh snaps!! haha..thats a lil far of a drive for me..ay-nako..would u be willing to ship jus that part i need? the piping before the big long Y-PIPE

dRo15

iTrader: (10)

So is this the piece your looking for and are both ends of this welded? You stated your whole exhaust is welded except to where you axle backs are. You may be better off going to a muffler shop and having the rear of this pipe cut and weld new flanges on.

4play4dr

thats exactly the piece i need..the header side isnt welded tho..only the cat side..the last owner actually removed teh cat..so its like a straight pipe..i might just have to take it to a muffler shop to fix..i just wanted to keep the whole car as "stock" as possible

lexusscturbo

iTrader: (12)

D Ro what year is your car?

dRo15

iTrader: (10)

That's not mine. I found pics of a 300. I have a 430.

4play4dr

NVM..jus gonna take it to a muffler shop