FS: 2 GS HID OEM HEADLAMPS-L and R
02-28-07, 05:38 PM
#1
FS: 2 GS HID OEM HEADLAMPS-L and R
$350+ shipping. Local (so cal) preferred, but will ship at owner's expense.
Not the green tint version (01+)
Complete with d2r bulbs and ballasts. Just transfer your other bulbs: 9005 high beam, turn signal bulbs, and night time accessory lights.
Bought this from a body shop from a 2000 wrecked gs long ago. It's been sitting here.
Need to sell. 2nd baby is here, no more time and $ for mods
Right side is in good condition front, back, left, right, top, bottom with regular wear on the lens.
Left side is in good condition, but has a broken tab. Still can mount to the car since there are 3 other attach points. Also has a light scuff mark, but didn't show on camera.
Before 2nd baby, I had time to check for condensation.
Underside had a crack that was repaired with epoxy by the shop and used black tape( just to keep it looking black) . I hooked up and let it warm up for a good 10 minute. Took it out in the cold for another 20 minute and saw very minor condensation for the driver side.
Right side didn't show condensation.
I tried describing to the best of my knowledge. Locals are more than welcome to check out the headlamps.
Ask if you have further questions.
L side broken tab:
light scuff:
https://www.clublexus.com/gallery/da...lb_Medium_.JPG
https://www.clublexus.com/gallery/da...ed_Medium_.JPG
Not the green tint version (01+)
Complete with d2r bulbs and ballasts. Just transfer your other bulbs: 9005 high beam, turn signal bulbs, and night time accessory lights.
Bought this from a body shop from a 2000 wrecked gs long ago. It's been sitting here.
Need to sell. 2nd baby is here, no more time and $ for mods
Right side is in good condition front, back, left, right, top, bottom with regular wear on the lens.
Left side is in good condition, but has a broken tab. Still can mount to the car since there are 3 other attach points. Also has a light scuff mark, but didn't show on camera.
Before 2nd baby, I had time to check for condensation.
Underside had a crack that was repaired with epoxy by the shop and used black tape( just to keep it looking black) . I hooked up and let it warm up for a good 10 minute. Took it out in the cold for another 20 minute and saw very minor condensation for the driver side.
Right side didn't show condensation.
I tried describing to the best of my knowledge. Locals are more than welcome to check out the headlamps.
Ask if you have further questions.
L side broken tab:
light scuff:
https://www.clublexus.com/gallery/da...lb_Medium_.JPG
https://www.clublexus.com/gallery/da...ed_Medium_.JPG
Last edited by GS3Tek; 02-28-07 at 05:41 PM.
02-28-07, 07:10 PM
#2
hey,
I am very intersted in this. i just pmed you my number. call me or send me yours.
I have a 98 gs 300 non- hid. Can i just plug and play this and connect the ballast wires to my existing wires. i hope so. it comes with everything to plug and play right? ballasts, harness etc. To bolt onto exxisting non-hid wires.
very interested.paypal at hand
I am very intersted in this. i just pmed you my number. call me or send me yours.
I have a 98 gs 300 non- hid. Can i just plug and play this and connect the ballast wires to my existing wires. i hope so. it comes with everything to plug and play right? ballasts, harness etc. To bolt onto exxisting non-hid wires.
very interested.paypal at hand
Last edited by olddog; 02-28-07 at 08:01 PM. Reason: spelling and caps
03-01-07, 03:32 PM
#6
Probably picking these up today. Is there anything else I need to know about besides splicing HID ballast to 9006 harness and matching positive and negative? I will be keeping my stock 9005 high beam and running Polag M4's for the DRL's. Is there anything else I'm missing?
Moreover, any tips on how to manually aim the headlights as to now create glare for on-coming traffic? I realize that I will not have the auto leveling function.
Moreover, any tips on how to manually aim the headlights as to now create glare for on-coming traffic? I realize that I will not have the auto leveling function.
Trending Topics
03-14-07, 10:05 AM
#12
SOLD!!! MODS, PLEASE CLOSE.
^^^You can only get auto level from factory. There are 2 other sensors located in the front and rear wheel. You can get more information from the search feature-I'm no expert
Haven't heard of anyone retrofitting auto level in their car
^^^You can only get auto level from factory. There are 2 other sensors located in the front and rear wheel. You can get more information from the search feature-I'm no expert
Haven't heard of anyone retrofitting auto level in their car
Thread
Thread Starter
Forum
Replies
Last Post