TX 3 20" Lowenhart LR5 rims for UNDER $100
#1
Rookie
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: TX
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
3 20" Lowenhart LR5 rims for UNDER $100
I'm selling 3 20" Lowenhart LR5 rims. All three rims come with centercaps, although there may be a few screws missing from the caps. (Check ebay, these wheels are LESS than a single centercap.)
I bought these for my Lexus and intended to have a 4th wheel custom made to match the 3rd wheel, along with a matching face or 4 new faces. Unfortunately, my Lexus was recently totaled so I am unable to move forward with that plan.
Prices:
$50 flat. Take them! Trade me something useful for them!
If you want them shipped, you will have to cover that.
Specs:
Two of the rims are 20 x 9 with 38 offset, while the third rim is 20 x 10 with 45 offset.
Photo:
I bought these for my Lexus and intended to have a 4th wheel custom made to match the 3rd wheel, along with a matching face or 4 new faces. Unfortunately, my Lexus was recently totaled so I am unable to move forward with that plan.
Prices:
$50 flat. Take them! Trade me something useful for them!
If you want them shipped, you will have to cover that.
Specs:
Two of the rims are 20 x 9 with 38 offset, while the third rim is 20 x 10 with 45 offset.
Photo:
Last edited by koalaznbea; 11-23-10 at 01:18 PM.
#5
Driver School Candidate
Join Date: Aug 2005
Location: New York
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I would think they are welded due to the face design, 3pc wheels usually have all the bolts visible around the face. Those dont have bolts on the spokes.
A sure fire way to check would be to look at the barrel from the inner portion, if the bolts don't have nuts fastening them then the wheels are welded.
A sure fire way to check would be to look at the barrel from the inner portion, if the bolts don't have nuts fastening them then the wheels are welded.
Last edited by Misdeismo; 09-26-10 at 05:25 AM.
Trending Topics
#9
Rookie
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: TX
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
They are 2 piece wheels, at the very least. The faces *DO* come off, but I don't think you can split the lip and barrel that easily (although, their is a line of between the two pieces sealed together by silicone, or whatever substance they use to seal wheels).
#12
Rookie
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: TX
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
I am now willing to ship these wheels. I will only charge $50 for the wheels + shipping cost. Should total to less than $200; I haven't gotten an actual estimate from UPS.
Also, I think the general consensus is that these are three piece wheels. The bolts do have nuts behind them securing the face to the rest of the wheel.
Also, I think the general consensus is that these are three piece wheels. The bolts do have nuts behind them securing the face to the rest of the wheel.
Last edited by koalaznbea; 11-23-10 at 01:20 PM.