Airlift ECU not found help
#1
Airlift ECU not found help
Hey guys so I took the plunge and purchased an Airlift 3h3p for my car and I'm having an issue with it. At first after I installed it it worked and was Kool, I was having fun playing with it since it is my first time on air, then later on in the day I went back to mess with it some more and as soon as I turned the car I get a ECU not found on the controller. So I check all the wiring all the fuses and nothing. So I disconnected the battery and left it alone for a good 30 min and tried again and nothing. The next morning I fired it up and boom it starts working so I was like Kool. Well later on again that day ECU not found. I've called airlift during this entire issue and they have been really helpful. They are also exchanging the manifold for me and sending me a new one. But I am still wondering why it was doing that. Any body have same issue and maybe found a solution for this, I'm not certain it is the manifold until I switch it out. Any input would be appreciated. Thanks
#3
Ok so since no one chimed in on this thread I figured what the problem was. Through process of elimination first the manifold then the controller finally the main connector. It was the cable that ran with the main connector that connects to the USB cable of the controller. So there you go if any one has this issue there it is. Through out the whole issue Airlift was there helping me and changing out what needed to be replaced. Great customer support.
#5
Driver School Candidate
Join Date: Jul 2018
Location: Alabama
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Parts location
Ok so since no one chimed in on this thread I figured what the problem was. Through process of elimination first the manifold then the controller finally the main connector. It was the cable that ran with the main connector that connects to the USB cable of the controller. So there you go if any one has this issue there it is. Through out the whole issue Airlift was there helping me and changing out what needed to be replaced. Great customer support.
Thread
Thread Starter
Forum
Replies
Last Post