My Budget VIP Inspired Build
#1
My Budget VIP Inspired Build
I have a a 99 black on black ucf21. Due to budget I am very limited on what I can and will do to this car.
I purchased this car for $4k so I can't really see me spending that much on wheels. My interior is mint so that's not the focus right now. Since I've had the car I've went thru 4 sets of wheels. Currently I'm riding on 20x8.5 Lenso rims, I plan on getting the fronts widened to a 9.5 and the rears to a 10.5.
I have ls460 front and rear bumpers but I've been too busy and a little lazy to do the bumper mods. I'm currently on Megans LP from a 2GS and due to the spring rate I can slam it.
So here's the plan:
Get my wheels widen the wheels, get the bumpers done block and cut the paint. Then take it from there. This is my daily and I have a 4 yr old so no tables or curtains since they would get destroyed. Lol more to come as I build my ride.
I purchased this car for $4k so I can't really see me spending that much on wheels. My interior is mint so that's not the focus right now. Since I've had the car I've went thru 4 sets of wheels. Currently I'm riding on 20x8.5 Lenso rims, I plan on getting the fronts widened to a 9.5 and the rears to a 10.5.
I have ls460 front and rear bumpers but I've been too busy and a little lazy to do the bumper mods. I'm currently on Megans LP from a 2GS and due to the spring rate I can slam it.
So here's the plan:
Get my wheels widen the wheels, get the bumpers done block and cut the paint. Then take it from there. This is my daily and I have a 4 yr old so no tables or curtains since they would get destroyed. Lol more to come as I build my ride.
#2
Lead Lap
iTrader: (1)
Join Date: Nov 2006
Location: JP (oki to be precise :D)
Posts: 4,918
Likes: 0
Received 2 Likes
on
2 Posts
nice platform, the ride looks clean, but you gotta do something about those wheels. those may pass in TX or with the dub style folks but not vip at all. just telling it like it is.
but with your car and lowered stance, it would really benefit from some nice classy wheels.
but with your car and lowered stance, it would really benefit from some nice classy wheels.
#4
I respect your opinion bro no problem with that. I have more wheels I just havent put them on yet. I need to do some fender works since I am going to run a 10 inch square set up all around. I am really just starting this build and taking my time because I want to do it right.
What I didnt mention that I went through the engine before any mods were done. Timing belt, water pump, tune up etc. Although I didnt really need them I went ahead and installed new control arm bushings because I know I was going to play with my suspension. I have a GS400 that I am building at the same time so it depends on how I am feeling, how much money I have to spend that will dictate what I do to either car.
What I didnt mention that I went through the engine before any mods were done. Timing belt, water pump, tune up etc. Although I didnt really need them I went ahead and installed new control arm bushings because I know I was going to play with my suspension. I have a GS400 that I am building at the same time so it depends on how I am feeling, how much money I have to spend that will dictate what I do to either car.
Trending Topics
#11
These are my top 3 pics all concave I plan on running a 10 in square set up.
#12
Lexus Champion
iTrader: (6)
I could pour money in this quick but I am taking my time. As for budget I dont believe in paying full price for anything. Thats just me, those wheels I have on the car now I paid $250 bucks for them and they look ok. They are just temp wheels for now until I decide what wheels I am going to get. And BTW wheels are going to be the next to the last thing I get, right now I have a few more maitenance issues to tend too. I need to get my bumpers fused install my skirts and starting prepping the body for paint. The new wheels will come in the middle of hte paint prepping process since I need to roll or cut fenders etc to get my fitment down perfect. I was thinking of a 3 piece wheel but honestly I am seeing alot of other wheels are arent 3 piece that look just as good.
These are my top 3 pics all concave I plan on running a 10 in square set up.
These are my top 3 pics all concave I plan on running a 10 in square set up.
#13
Decided On The Wheels
So I decided to go with the middle wheel The Rohana RC10, I can get them in a 20x10 +35 for the front and 20x11 +28 in the rear. It's going to take a few weeks to get them. Once I get them in my possesion I am just going to do a test fit fender work, and then off to powder coating. I am still unsure on the color as of yet, Nothing crazy but classy since my car will be going all black.