Help calculating my offset
#1
Help calculating my offset
Hello guys, I need help figuring out the offset of my new wheels. I measured by first calculating whole width of the wheels. fronts were 9 inch wide and rear were 10 inch wide. Then I put a piece of wood on top of the rim with the front facing down. I measured the length from the surface of the " back mount face" to the bottom of the piece of wood. I measured 6.5 inches for the front and 7.25 for the rear. So 6.5-4.5=2 and 7.25-5=2.25. Convert to mm and I got +50.4 for the front and +57.15 for rear. Is this correct? I test fit the rims on my LS430 and they go out past my fenders. The offsets should be conservative so I dont know. Any help is appreciated. Thanks
Thread
Thread Starter
Forum
Replies
Last Post
laxton
IS - 1st Gen (2001-2005)
7
01-26-13 11:48 AM