Rims on a budget?
#5
Rookie
Thread Starter
Join Date: Mar 2012
Location: Washington
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
My buddy got some xxrs and there sick just cant deside...I was looking at BBS RS reps there sick but at 450$ a rim just looking for like a 3 to 4 inch and with a atleast +25 offset thank u so much both of u I just needed some help finding rims
#7
Rookie
Thread Starter
Join Date: Mar 2012
Location: Washington
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Now I am heaving truble choosing size I know 17u are a little small for a SC but these rims are in 19 does that look good (there BBS Lm reps) can you guys post some pictures of sc's with 19's please
Trending Topics
#13
Lexus Champion
iTrader: (10)
Even well known brand rims bend and crack. Don't be so naive. You're talking like a child. If you run your wheels through curbs and potholes, do you really expect they'd withstand that? Is that the proper use of wheels? Anybody who goes aftermarket should know that it wouldn't perform as well as the OEM parts. The cars weren't tested on aftermarket parts when they were being designed. The 2 piece/3 piece wheels people buy are mostly designed for racing or show. Do they have potholes there? Think before you say ish that don't make sense. There's nothing bad about balling on a budget, it means you're spending your money wisely. Besides, if you bend it, for that price it wouldn't hurt as much as bending a 3 piece Work wheel etc..
Last edited by OG Dada; 03-18-12 at 12:04 PM.
#14
Pole Position
iTrader: (3)
Even well known brand rims bend and crack. Don't be so naive. You're talking like a child. If you run your wheels through curbs and potholes, do you really expect they'd withstand that? Is that the proper use of wheels? Anybody who goes aftermarket should know that it wouldn't perform as well as the OEM parts. The cars weren't tested on aftermarket parts. The 2 piece/3 piece wheels people buy are mostly designed for racing or show. Do they have potholes there? Think before you say ish that don't make sense. There's nothing bad about balling on a budget, it means you're spending your money wisely. Besides, if you bend it, for that price it wouldn't hurt as much as bending a 3 piece Work wheel etc..
#15
Even well known brand rims bend and crack. Don't be so naive. You're talking like a child. If you run your wheels through curbs and potholes, do you really expect they'd withstand that? Is that the proper use of wheels? Anybody who goes aftermarket should know that it wouldn't perform as well as the OEM parts. The cars weren't tested on aftermarket parts when they were being designed. The 2 piece/3 piece wheels people buy are mostly designed for racing or show. Do they have potholes there? Think before you say ish that don't make sense. There's nothing bad about balling on a budget, it means you're spending your money wisely. Besides, if you bend it, for that price it wouldn't hurt as much as bending a 3 piece Work wheel etc..