Translation On My Lows
#1
Lexus Champion
Thread Starter
Translation On My Lows
Wheel Gods,
I have my wheels off for a little maintenance on my fronts, so with the opportunity, I've cleaned up the rear 19s today, and took these pics.
http://www.digitalsimple.com/Lowenhart%20Page.htm
What do the not so obvious markings communicate?
TIA
I have my wheels off for a little maintenance on my fronts, so with the opportunity, I've cleaned up the rear 19s today, and took these pics.
http://www.digitalsimple.com/Lowenhart%20Page.htm
What do the not so obvious markings communicate?
TIA
#7
Lexus Champion
Thread Starter
Originally posted by gs4will
Dex,
still nothing...:eek:
Dex,
still nothing...:eek:
ANYWAY, I took some pics of th codes and whatnot from te back of my rear 19s today. Here they are.
Trending Topics
#13
Lexus Fanatic
ok..Dex,
let me solve the "puzzle" for you...
1. well, MADE IN JAPAN..you know, the good quality control land...
2. VIA-Vehicle Inspection Association, 695 kilogram, ~1500lb. this has to do with max load i think..not quite sure.
***VIA should also have JWL mark too(japan light alloy association)
these 2 marks means that you are getting quality wheels..German/european wheels also have them..some are passed by TUV...
3. 19"(diameter)x9.5" width..offset +44
4. Hart wheels(Lowenhart wheels...the parent co is Takechi Project)..i think your wheels is made by WORK, like many lowenharts and l-sportlines
5. A356 EK..not sure about this one
6. 5:114.3, 5 holes, 114.3 is the PCD, distance between each holes i think...bmw has 120(not sure on this one)....and benz has 112
let me solve the "puzzle" for you...
1. well, MADE IN JAPAN..you know, the good quality control land...
2. VIA-Vehicle Inspection Association, 695 kilogram, ~1500lb. this has to do with max load i think..not quite sure.
***VIA should also have JWL mark too(japan light alloy association)
these 2 marks means that you are getting quality wheels..German/european wheels also have them..some are passed by TUV...
3. 19"(diameter)x9.5" width..offset +44
4. Hart wheels(Lowenhart wheels...the parent co is Takechi Project)..i think your wheels is made by WORK, like many lowenharts and l-sportlines
5. A356 EK..not sure about this one
6. 5:114.3, 5 holes, 114.3 is the PCD, distance between each holes i think...bmw has 120(not sure on this one)....and benz has 112
Last edited by GS4Will; 08-24-02 at 03:54 AM.
Thread
Thread Starter
Forum
Replies
Last Post