NoRyceGS4

Ok so I'm not actually selling wheels if this belongs somewhere else please move it appropriately. But I've noticed alot of people don't know, or weren't given their offset information and that is hurting their sales. So just to help you guys out who have iforged custom offset or HRE, or just plain dont know it I found this online.

Wheel offset = (overall wheel width / 2) - (distance from boltup face to inner rim)

Usually you'll want to convert to milimeters if you for some reason measured in inches.

To figure out what you can fit, go to your car and measure from the mounting face to the fender. Then measure from suspension to bolt up face. Then overall from suspension to the fender. Take these measurements, and compare them to the wheels in question.

Good luck