before you get all bent out of shape about spinners
#1
Driver
Thread Starter
Join Date: Mar 2004
Location: Indiana
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
before you get all bent out of shape about spinners
i was curious of how many of you have seen spinners that are not spinning like they should? do you think if that problem arises i could take the spinner off and maybe clean it out and remount them and they would work? i know most people think add on spinners are tacky but i like em and am going to get some for my sc....one thing i wanted to know though if i put twenys on my 97 sc300 with the eibach pro kit would a addon spinner that sticks out past the wheel just a little bit possibly hit the fender on a bump or would it have to be a pretty big bump? i chose my wheel cautiously and it has a bout a two inch lip so the spinner will hardly stick out.
thanks
ryan
thanks
ryan
#2
Yikes, an SC with 20" spinners!!! Careful, if you brake from speeds over 60 it might aeroplane!!!
Seriously, when you've done it post up some pics. You might convince us.
George
Seriously, when you've done it post up some pics. You might convince us.
George
Last edited by Carpe Diem; 03-10-04 at 03:37 PM.
#3
Forum Administrator
iTrader: (2)
Ryan,
This thread has nothing to do with the SC400/300 model, its a post about wheels and belongs in the wheels / tires forum. That's where I'm moving it.
This thread has nothing to do with the SC400/300 model, its a post about wheels and belongs in the wheels / tires forum. That's where I'm moving it.
#4
Lexus Fanatic
iTrader: (1)
bent out of shape
Hey dude, no one is bent out of shape. I think you're missing the message though. You keep asking for advice about spinners and I don't think there is anyone here who knows a lot about them. Just using logic and observation, it looks like the add on spinners may stick out some. The wheels that come from the factory as spinners seem to be set evenly with the edge of the lip. I can't say for sure. I don't look at them that hard. You may have to get your advice about spinners on another site or at a wheel shop. Post pics when you get them.
Good luck.
Good luck.
#5
Former Sponsor
Join Date: Jan 2003
Location: D2'sville
Posts: 13,002
Likes: 0
Received 0 Likes
on
0 Posts
Hey twanky different strokes for different folks, one thing, once you start a thread make sure you read all of the responses carefully for a day or two before starting a similar thread. Last night I posted a true spinning wheel (not add-on) made by DUB (who brought Davin in to do R&D) for about 5k with tires, on your other thread.
CLICK HERE TO SEE THAT WHEEL
If someone makes a post that you dont understand in your thread, just press the 'PM' button under their name to send them a Private Message! We will help you to the best of our ability, but like reggie said, not many add on spinner owners 'round these parts! I know someone that bought a set and one of them wasnt spinning the next day so buyer beware! LOL
CLICK HERE TO SEE THAT WHEEL
If someone makes a post that you dont understand in your thread, just press the 'PM' button under their name to send them a Private Message! We will help you to the best of our ability, but like reggie said, not many add on spinner owners 'round these parts! I know someone that bought a set and one of them wasnt spinning the next day so buyer beware! LOL
#6
Driver
Thread Starter
Join Date: Mar 2004
Location: Indiana
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
i know man i saw that i just aint trying to drop that much paper on wheels...i just think it will look good going with the setup i am going to do with the spinner just sticking out just a little bit....trust me i think it looks tacky as hell with a spinner stickin out an inch...cut and paste that to your web adress and the guy said it will look about like that....................... http://abc.eznettools.net/adaptivest...RZAWheels.html
#7
Former Sponsor
Join Date: Jan 2003
Location: D2'sville
Posts: 13,002
Likes: 0
Received 0 Likes
on
0 Posts
check these out then, real good price
20" Wheels/Tires + Spinners FOR SALE
I dont know this seller, but I'm just letting you know whats around, maybe you can set something up!
20" Wheels/Tires + Spinners FOR SALE
I dont know this seller, but I'm just letting you know whats around, maybe you can set something up!
Trending Topics
#8
Driver
Thread Starter
Join Date: Mar 2004
Location: Indiana
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
please help
i am looking at spinners for my sc i wanted to know if spintek was manufactured here in america? also wanted to know out of all the add on spinners kits which ones were the best....spintek i can get the best deal on just dont want to buy if they are made in china in case any problems arise......i heard if the spinners stops spinning you need to buy new bearings wondering how much that would cost?
thanks for the help
thanks for the help
Thread
Thread Starter
Forum
Replies
Last Post
Matt300ZXT
SC- 1st Gen (1992-2000)
24
11-22-11 03:20 PM