SSR Prof. SP1's - Club Lexus Forums

Log In 


SSR Prof. SP1's

Reply
 
 
 
Thread Tools Search this Thread
Old 03-09-04, 06:19 PM   #1
JFlo
Lead Lap
Thread Starter
 
JFlo's Avatar
 
Join Date: Jan 2004
Location: Ohio
Posts: 772
Default SSR Prof. SP1's

I have been shopping around for a good price on a set of SSR Proffesor SP1's in the hyperblack. The set-up I want to run is a 19x10 in the rear and a 19x9 in the front. I know that the wheel is imported, so that is not a problem. I was told by one company that I talked to that the Hyper Black color is $125 more per wheel. Is this true? I am also being quoted anywhere from $750 per wheels to $900 per wheel. I know that they cost a lot, but I am making sure that noone has a better place to go. Let me know what you all think.
JFlo is offline   Reply With Quote
Old 03-09-04, 07:08 PM   #2
GGP4me
Driver
 
Join Date: Oct 2001
Location: California
Posts: 127
Default Try Steve...

Have you tried Steve Ganz at Carson Toyota?

SupraTRD on this board

Carson Toyota / Lexus Parts
We offer major brands such as TRD, Tom's Racing, L-Sportline, JIC-Magic, TTE, L-Tuned, TEIN and much more! | Address: 1333 E. 223rd Street, Carson, CA 90745 Phone: (310) 522-2381 | Website: www.l-tunedparts.com | Email: gonzo4u@earthlink.net

He had obtained a set for an IS300 before.

Good Luck
GGP4me is offline   Reply With Quote
Old 03-09-04, 08:07 PM   #3
JFlo
Lead Lap
Thread Starter
 
JFlo's Avatar
 
Join Date: Jan 2004
Location: Ohio
Posts: 772
Default

Thanks for heads up. I sent him an email, so hopefully I can get these on the way.
JFlo is offline   Reply With Quote
Old 03-09-04, 10:30 PM   #4
GS4Will
Lexus Fanatic
 
Join Date: Feb 2001
Location: California
Posts: 5,445
Default

the current list price is
$690+100(for Super blk coating, aka hyper blk) for 19x8.5= $790 each
and $730+100 for 19x10s = $830 each

this is based on SSR japan site
GS4Will is offline   Reply With Quote
Old 03-11-04, 10:24 AM   #5
ummagawd
Lexus Test Driver
iTrader: (1)
 
ummagawd's Avatar
 
Join Date: May 2003
Location: California
Posts: 1,432
Default

OooOooOoo that was my first wheel choice... unfortunately after calculating tire costs and dipping them in the color i want... it's just too much for me to buy right now.

anyways... PLEASE post detailed pics and offsets!
ummagawd is offline   Reply With Quote
Old 03-13-04, 07:58 AM   #6
gtfour43
Driver
 
Join Date: Feb 2004
Location: Hawaii
Posts: 142
Default

Those are the rims I got on my Tacoma. My rims were an extra $100 each for the SBC. Here' a pic





Last edited by gtfour43; 03-13-04 at 07:59 AM.
gtfour43 is offline   Reply With Quote
Old 03-13-04, 11:07 AM   #7
JFlo
Lead Lap
Thread Starter
 
JFlo's Avatar
 
Join Date: Jan 2004
Location: Ohio
Posts: 772
Default

Awwwww!!! Why did you have to post pictures of them? Now I am going to have to buy them even faster. I am just waiting for my Lowenharts to sell, and then it is SSR time!!!
JFlo is offline   Reply With Quote
Old 03-14-04, 09:39 AM   #8
hungwin
Rookie
iTrader: (1)
 
hungwin's Avatar
 
Join Date: Apr 2003
Location: Virginia
Posts: 70
Default

gtfour43, great looking Taco!!!

What sizes, offsets, and faces (super low, normal, mid, hyper) did you end up getting? I'd like to get an idea of what size lip you have based on that data.

What does SSR consider as the lip in their specs? From where the spokes end to the edge of the rim or just the flat portion of the lip, not including the stepped part of the lip?

I'm considering some for my JZA80 but I am limited to a few selections:

Front: 18x9.0 with 34mm lip, +44 offset, hyper face
Rear: 18x10.0 with 59mm lip, +49 offset, normal face

If I can fit it in with cut/rolled rear fenders, I may try 18x10.5 with a 72 mm lip, +43 offset, normal face.

Quote:
Originally posted by gtfour43
Those are the rims I got on my Tacoma. My rims were an extra $100 each for the SBC. Here' a pic





Last edited by hungwin; 03-14-04 at 09:42 AM.
hungwin is offline   Reply With Quote
Old 03-14-04, 01:01 PM   #9
gtfour43
Driver
 
Join Date: Feb 2004
Location: Hawaii
Posts: 142
Default

I'm not too sure on what face I got but the boxes say C+43 for the fronts and F+62 for the rears. The tacoma has a weird offset since its a truck. I could only fit a wider rim in the back because there is more room towards the frame so thats where I got my extra inch and a half from. The lips are only about two inches from the face to the outer part of the lips. Lips are same front and rear cause of the offsets. The rims are 18x8.5 and 18x10 btw.



Clearance between the rim and frame.


Last edited by gtfour43; 03-14-04 at 01:02 PM.
gtfour43 is offline   Reply With Quote
Old 03-14-04, 03:18 PM   #10
Captain Bone
Lexus Champion
 
Captain Bone's Avatar
 
Join Date: Jul 2002
Location: Hamilton, NJ
Posts: 4,105
Default

Lookin' Good!

More pics!

-Anthony
Captain Bone is offline   Reply With Quote
Old 03-14-04, 03:56 PM   #11
hungwin
Rookie
iTrader: (1)
 
hungwin's Avatar
 
Join Date: Apr 2003
Location: Virginia
Posts: 70
Default

Thanks for the info and pics.

Going by your numbers and looking at the SSR spec sheet , it looks like you have Super Low disc/face front and rear with 59 mm lips (~2.32 inches).

That would be the amount of lip I could get on the back of my Supra . . . hmm, I wonder if that's enough.



Quote:
Originally posted by gtfour43
I'm not too sure on what face I got but the boxes say C+43 for the fronts and F+62 for the rears. The tacoma has a weird offset since its a truck. I could only fit a wider rim in the back because there is more room towards the frame so thats where I got my extra inch and a half from. The lips are only about two inches from the face to the outer part of the lips. Lips are same front and rear cause of the offsets. The rims are 18x8.5 and 18x10 btw.
hungwin is offline   Reply With Quote
Old 03-18-04, 06:56 AM   #12
gtfour43
Driver
 
Join Date: Feb 2004
Location: Hawaii
Posts: 142
Default

Does anyone know if these front rims will fit a first gen LS400? Thanks
gtfour43 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
HI WTB (PAIR) of 19" SSR SP-1s Dawa Wheels and Tires Classifieds 3 11-04-15 06:39 PM
CA WTB: 19" ssr sp3, vs-xx, or work equips avinad Wheels and Tires Classifieds 20 04-29-14 02:05 AM
Wheel fitment question LionelHutz IS F (2008-2014) 4 12-15-13 09:25 PM
CA Brand New SSR SP-1 Professor 19x9.5 +5 NR 19x10.5 LO 5x114.3 SBC OC SoCal ty423 Wheels and Tires Classifieds 25 03-15-11 12:29 PM
SSR SP1 19" wheels J J Wheels and Tires Classifieds 30 08-25-07 12:21 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -7. The time now is 09:48 PM.


Copyright © 2000-2016 Internet Brands, Inc. All Rights Reserved