Is 350 fsport brakes not working
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2016
Location: California
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Is 350 fsport brakes not working
Late last night me and my pops put in new front brakes on my is350 f sport we looked at one of the threads and it helped us finish the whole process. But now that we went around the corner the brakes wont depress. I put my whole foot on the brake and its nots not braking. I rechecked them this morning with my dad and its all fine dont know why its doing that. What should i do .
#4
Intermediate
iTrader: (2)
If the pedal is soft/spongy feeling then I'd suspect you have air in the lines.
(Kind of odd situation for just a pad change)
If pumping the brakes a few times doesn't get that feeling any better then you'd probably want to try bleeding your brakes.
It's not a fun process, but having a helping hand can work wonders.
Plenty of YouTube videos on that process if you need some references.
(Kind of odd situation for just a pad change)
If pumping the brakes a few times doesn't get that feeling any better then you'd probably want to try bleeding your brakes.
It's not a fun process, but having a helping hand can work wonders.
Plenty of YouTube videos on that process if you need some references.
#5
Did you disconnect the brake lines that carry the hydraulic fluid? If so, you need to bleed the air out.
If not, then pump the brakes a few times with the engine running before driving off. Make sure the pads seat to the rotor.
Always pump the brakes a good 7-10 times immediately after installing new pads and/or rotors.
If not, then pump the brakes a few times with the engine running before driving off. Make sure the pads seat to the rotor.
Always pump the brakes a good 7-10 times immediately after installing new pads and/or rotors.
Thread
Thread Starter
Forum
Replies
Last Post