RS R super downs and toe adjustment...
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2015
Location: ca
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
RS R super downs and toe adjustment...
For people running rsr's super downs are you able to get your rear toe in spec? I know FIG Engineering now makes the rear camber kits but not sure if toe has been an issue. Thanks for any info.
#5
Pit Crew
iTrader: (1)
Toe will be fine. Just FYI my rear camber was -2.0 and -2.2 in the rear and I'm lowered 1inch. That's very similar to RSR down specs. The max spec on the rear is -2.3, so I'm sure that the super downs will push your rear out of spec. I did just install some SPC camber arms though and just had my car aligned. He set my rears at -1.4 on both sides. Easy install if you have your rear springs out. Toe will be fine but if you're worried about tire wear slap some camber arms on there.
#6
Driver School Candidate
Thread Starter
Join Date: Feb 2015
Location: ca
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Toe will be fine. Just FYI my rear camber was -2.0 and -2.2 in the rear and I'm lowered 1inch. That's very similar to RSR down specs. The max spec on the rear is -2.3, so I'm sure that the super downs will push your rear out of spec. I did just install some SPC camber arms though and just had my car aligned. He set my rears at -1.4 on both sides. Easy install if you have your rear springs out. Toe will be fine but if you're worried about tire wear slap some camber arms on there.
Yea I def plan on getting a camber kit. I didn't know spc made a kit for the 3is yet. good to know
Thread
Thread Starter
Forum
Replies
Last Post
Sheehan1p
Suspension and Brakes
26
05-29-11 11:54 AM