My 03 GS300 needs Front Upper Control Arms
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2011
Location: NJ
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
My 03 GS300 needs Front Upper Control Arms
My 03 GS300 need front right side Upper Control Arm, Should i get the whole arm or just go for the bushings has anyone had any success with just replacing the bushings. If so please tell where i can purchase thanks.
#2
Lead Lap
iTrader: (4)
Someone is selling the SPC upper control arms with bushings included. I'd replace both with bushings and even the lower ball joints & toe rods all at once to save on labor charges if you haven't already replaced those. However to address your other question would you want to put old bushings on a brand new part?...
#5
I put Roca upper control arm bushings and my car rides great bushings run around 100 dollars.you will have to have them pressed in and the old ones taken out. Not hard to take the arm out there is a thread on here on how to.
Thread
Thread Starter
Forum
Replies
Last Post
realsync1
GS - 2nd Gen (1998-2005)
13
12-14-22 11:00 AM