How to Replace 98 GS300 Brake Master Cylnder Booster Unit
#18
Driver School Candidate
Join Date: Mar 2015
Location: MD
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I recently upgraded my master cylinder to 02. My sensor from the old cylinder is bad and the connector for the new cylinder is different. I am looking for a pressure sensor for 98-00 gs300 or a conector for 02 sensor. Any help will be appreciated.
#19
Driver School Candidate
Join Date: Mar 2017
Location: KS
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Need Help
Hey guys. Do you know if a failed master pump would cause these symptoms... the dashboard has all the lights to the abs system lit up. BRAKE VSC and others I can't remember right now. The car had been sitting not being used for over a year. I jumped it and all seems ok but brake is hard to push and has a continuous beep also. Pretty sure the battery is low on charge. And forgot to mention it's a 98 GS400. Can you guys provide some feedback.
#20
Driver School Candidate
Join Date: Apr 2017
Location: Virginia
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Did you bleed or flush system first or was there any pressure that needed to be released before removing? I'm about to replace mine today and I want to make sure.
#21
Pole Position
#23
Driver School Candidate
#25
Driver School Candidate
#26
Driver School Candidate
#27
Driver School Candidate
pretty sure both my 01 lx470 and my 98 gs400 are going to need some replacements...is there any way to retrofit something that doesn't have a giant A.I genital in the way of me braking safely?
Thread
Thread Starter
Forum
Replies
Last Post
ls400beave
Suspension and Brakes
13
06-20-12 07:59 AM