I need help ASAP BCR Coilovers Uneven drop
#17
Driver School Candidate
Thread Starter
Join Date: Dec 2010
Location: Fl
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
#18
Driver School Candidate
Thread Starter
Join Date: Dec 2010
Location: Fl
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
#26
You should fix that cause your car is going to ride uneven this is not good for breaking and accelerating. It throws the whole far off balance. Not to mention it doesn't look proper.
#27
Pole Position
iTrader: (8)
Join Date: Apr 2011
Location: Ca
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
I dumped my **** even more yesterday. 1.5 finger gap from fender to rim in the front, 1/2 a finger from fender to rim in the rear. The rear right is always lower though. I adjusted it by making it three threads taller than the left side. So for me, in the rear, I have about 12 threads left before it is completely maxed out. I did 12 on the rear driver side, and 15 on the rear passenger side. That way, both sides sit even. :P
#28
It took me a bit to get my car even at all 4 corners. You need to remember that if you lower the driver front it will raise the passenger rear and vise versa. I still dealing with some rubbing issues
Thread
Thread Starter
Forum
Replies
Last Post