Bushings questions!
#1
Driver
Thread Starter
Join Date: Sep 2010
Location: Florida
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Bushings questions!
Okay so when I go over bumps or wear spots in the road my sc makes a fairly violent clunking noise. I am aware I need new struts but it sounds like it may be something else as well. Sometimes I hear a noise that sounds like rubber squeaking? control arm busing might be needed? Are polly mounts available to us and if so where?
#4
Lexus Test Driver
iTrader: (14)
Join Date: Jun 2009
Location: CA
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
actually, the bushings for every arm bushing on the car totals up to just over $100. If you're paying for labor, otoh, then maybe. unless it's the rear uca, shouldn't be too hard though.
#5
Lead Lap
iTrader: (1)
Join Date: Jul 2008
Location: nc
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know of the company energy suspension.They had a write up in the last issue of street trucks.Yeah i know///this is a sc forum but it stated in the article that they offer kits for nearly every car on the market.So any of you know if the sc is one of them.Parts are also polyurethane.i called but got voice mail.i guess i can go to the web site but i like to talk to a live person.
#6
Driver
Thread Starter
Join Date: Sep 2010
Location: Florida
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
If you guys can point out where to buy id be greatfull. So far I have found bushing for each arm to be $100 so thats $200 each side because of upper and lower. I didnt plan on this costing $800.
Trending Topics
#8
Lead Lap
iTrader: (1)
Join Date: Jul 2008
Location: nc
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know of the company energy suspension.They had a write up in the last issue of street trucks.Yeah i know///this is a sc forum but it stated in the article that they offer kits for nearly every car on the market.So any of you know if the sc is one of them.Parts are also polyurethane.i called but got voice mail.i guess i can go to the web site but i like to talk to a live person.
#9
Driver
Thread Starter
Join Date: Sep 2010
Location: Florida
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Lol I just called them. Im not sure its the bushings yet but im confident they are and would like to replace them all in one shot if I can get them cheap enough
#11
Driver
Thread Starter
Join Date: Sep 2010
Location: Florida
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Wow I didnt even think of jegs.. $56 for a set. Is the set just for one control arm or the whole front/rear?
#13
Driver
Thread Starter
Join Date: Sep 2010
Location: Florida
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I did searching but as normal I found a bunch of threads with jumbled reviews of distributors and arguments rather than part quality. I outsourced my search and I decided the Polythane sets from Jegs will be my way to go once I purchase coilovers.
#14
Lead Lap
iTrader: (3)
front: http://www.jegs.com/i/Prothane/311/18-207-BL/10002/-1
rear: http://www.jegs.com/i/Prothane/311/18-304-BL/10002/-1