98GRider

Well, the brakes in my 98gs300 seem to be bad or is it just me. I would have to step on the brakes almost all the way to the ground to get the brakes to work. how do i fix this so its like normal? its seems dangerous to me, any suggestions?

YviE

iTrader: (3)

Did you check the fluid level, the brake pads and the brake lines? Possible frozen calipers...

What have you checked so far?

Btw, welcome to CL!

kamlung

iTrader: (8)

check the master cylinder.. any leaks???

raytseng

just take it to a shop and have them work on it.
It might be as easy as needing to flush the brake fluid, or there might be a leak or something broken in the brake system.

It is not normal.

PHML

iTrader: (33)

check brake fluid...if good...then bleed the brakes and check the pads/rotors....worse case...frozen piston in the caliper, but it can be fixed easily...diy job.

vwynn

iTrader: (4)

i had that problem on my original brakes... i just swapped out for TT 4 pistons n called it a day