wheel adapters?
#2
Banned - could not follow forum rules
Join Date: Oct 2005
Location: CA
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
Try Ebay, if you want a 3/4" pro adaptors with rim hub fit (perfect for the rear wheels - " strength") I got an extra pair and paid $160 for both, didn't need them on a brake swap but I do need a good offer to give them up..
Last edited by jibbby; 05-16-06 at 01:55 PM.
#3
Banned - could not follow forum rules
Join Date: Oct 2005
Location: CA
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
Don't use these adaptors on the rears if your car has some power....The big adaptor in the pic failed a year ago and sent my rear tire flying into some ones front yard while going about 40mph ...I then road my rotor to a stop..I am lucky as it could have been alot worse, but what a spark show I made, better then most fireworks... I wish I would have saved the broken adaptor but I trashed it...
Anyway, just be careful when using spacers and or adaptors, and always make sure you have 6 full turns on your threads/lug nuts when using spacers on the rears...Longer studs are needed on these SC's when using over 1/4 spacers...
Anyway, just be careful when using spacers and or adaptors, and always make sure you have 6 full turns on your threads/lug nuts when using spacers on the rears...Longer studs are needed on these SC's when using over 1/4 spacers...
Last edited by jibbby; 05-16-06 at 01:57 PM.
#5
Banned - could not follow forum rules
Join Date: Oct 2005
Location: CA
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
Yes alluminum as most thick ones are.......Here is another pic...that little lip you see on the adaptor makes all the difference for strength... You also won't find any 3/4" inch adaptors anywhere...Most makes start at 1"....If you want the name of the business that makes the performance adaptors and spacers in Los Angeles Ca. I have to dig it up it has been a while....
Last edited by jibbby; 05-16-06 at 02:07 PM.
#6
Banned - could not follow forum rules
Join Date: Oct 2005
Location: CA
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
These 1/4" rear wheel spacers were made for my Sc400 also for $!40....These are the thickest you should go with out changing out your wheel studs for longer ones.....
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
sc400 2nv
Wheels, Tires & Brakes Forum
9
05-24-07 02:38 AM