More Contemporary Look for the 2013 GS...
10-29-16, 06:31 PM
#6
I am very interested in doing this it would be possible if somebody would make a abs mold for us :hmm:
10-29-16, 07:45 PM
#7
Driver
Thread Starter
boostinsc I actually "closed the loop" with the vinyl this week. It's more in line if the look of the 2016 LS600h. Abs mold would be expensive to initiate I guess. Chrome vinyl is cheap, easy to apply (heat gun needed) and should last for 6-7 years.
Trending Topics
10-30-16, 11:01 AM
#9
Driver
Thread Starter
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
This is the best out there. 3M used to make it, but stopped due to quality issues. Initial application not very tacky but easy to re-apply, once on the car, use heat gun (carefully, not to close as it will easily crinkle and be destroyed) and adhesion will be strong.
10-30-16, 11:14 AM
#10
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
This is the best out there. 3M used to make it, but stopped due to quality issues. Initial application not very tacky but easy to re-apply, once on the car, use heat gun (carefully, not to close as it will easily crinkle and be destroyed) and adhesion will be strong.
This is the best out there. 3M used to make it, but stopped due to quality issues. Initial application not very tacky but easy to re-apply, once on the car, use heat gun (carefully, not to close as it will easily crinkle and be destroyed) and adhesion will be strong.
10-30-16, 02:04 PM
#11
Driver
Thread Starter
Nice F Sport front (with Japanese fogs!). Mine went thru 2 automatic car washes with no problem. Show pics when done.
I put on F Sport wheels and put the 450h's on my HS250h....
I put on F Sport wheels and put the 450h's on my HS250h....
11-11-16, 03:58 PM
#14
I was going to make my own thread but I'll leave this here MSAGRO. This is what we are looking for to be exact, just the chrome trim. Can we get a part number or some kind of id in the part we can source from dealer or elsewhere your welcome!
http://www.ebay.com/itm/Front-Bumper-Cover-Lexus-Gs350-GS450H-2013-w-o-Headlamp-Washer-w-Sensors-holes-/131996504713?fits=Year%3A2013%7CModel%3AGS350&hash=item1ebb9ad289:g:PscAAOSw44BYF8to&vxp=mtr
http://www.ebay.com/itm/Front-Bumper-Cover-Lexus-Gs350-GS450H-2013-w-o-Headlamp-Washer-w-Sensors-holes-/131996504713?fits=Year%3A2013%7CModel%3AGS350&hash=item1ebb9ad289:g:PscAAOSw44BYF8to&vxp=mtr
11-11-16, 04:25 PM
#15
Driver
Thread Starter
Exactly boostinsc. Just those lower chrome bits. If you look closely you can see the division on the vertical pieces. Need that part#, better than my vinyl trick....