MO 2JZGE-T Custom FFIM
#1
Driver School Candidate
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Location: Missouri
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
2JZGE-T Custom FFIM
PRICE: $450 Shipped (In US)
ITEM: This is a custom 2JZGE-T FFIM with 90mm throttle body. I helped a welder friend design and make this for me. I ran it in my 1990 MK3 Supra with a 2JZGE-t setup. It worked great and supported +530whp. It however sticks up to high to fit in my new MK4 Supra. I really don't want to get rid of it but have no way to use it now. I do remember that I had to use a couple washers on the hood to shim it enough so the hood would not rub on throttle body flange. You could also cut a little out of the hood under-support to allow for extra clearance.
I did polish most of the plenum and it does have a few little blemishes but nothing major. I can take measurements and more pics on request. Please email me at j756169@yahoo.com to get a hold of me quickly.
------------------------------------------------------------------
NAME: Jesse Mcallister
PHONE NUMBER: Optional
EMAIL:j756169@yahoo.com
LOCATION: Southeast Missouri
PAYMENT PREFERENCE: Paypal j756169@yahoo.com
ITEM: This is a custom 2JZGE-T FFIM with 90mm throttle body. I helped a welder friend design and make this for me. I ran it in my 1990 MK3 Supra with a 2JZGE-t setup. It worked great and supported +530whp. It however sticks up to high to fit in my new MK4 Supra. I really don't want to get rid of it but have no way to use it now. I do remember that I had to use a couple washers on the hood to shim it enough so the hood would not rub on throttle body flange. You could also cut a little out of the hood under-support to allow for extra clearance.
I did polish most of the plenum and it does have a few little blemishes but nothing major. I can take measurements and more pics on request. Please email me at j756169@yahoo.com to get a hold of me quickly.
------------------------------------------------------------------
NAME: Jesse Mcallister
PHONE NUMBER: Optional
EMAIL:j756169@yahoo.com
LOCATION: Southeast Missouri
PAYMENT PREFERENCE: Paypal j756169@yahoo.com
#6
Driver School Candidate
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Location: Missouri
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Yes i would think so. Also im not sure how much clearence there is for this manifold on an sc300 in regards to the hood. I just know that it did not clear my mk4 hood by about a 1/2 inch. I would be more then fine with accepting a return on the manifold if it was not able to clear or fit prorperly.
Last edited by Jmcboost; 01-07-13 at 03:31 PM.
Trending Topics
#8
Driver School Candidate
Join Date: Dec 2012
Location: WI
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Just wanted to clarify, but is the mkiv hood contacting the whole top side of the plenum, or just the portion towards the throttle body. Which I can see be a contact area, where the hood starts to curve downward.
I am very interested in the manifold and any info would help.
I am very interested in the manifold and any info would help.
#9
Driver School Candidate
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Location: Missouri
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Well I have a carbon fiber MK4 hood. I'm not wanting to try to close it all the way or crack the hood with this manifold on. The issue is towards the front of the hood where the throttle body is. Or it least that's where it was touching on my MK3 also. I shimmed the hood on my mk3 supra by about 1/4 of an inch and it cleared fine. Email me if you need more info on it . I can try to take some measurements that may help.
Thread
Thread Starter
Forum
Replies
Last Post