Techstream TIS with SC430 - Key and TPMS Programming
#46
Instructor
1) Will this work on my 2004 LS as well as the 2006 SC? Or niether?
2) I cannot get the links to amazon to work, are there newer links?
3) Is there a version for Linux or will I have to get a Windoze computer just for this?
4) In AliExpress there are many of them with different software numbers. How do you know which one to get?
2) I cannot get the links to amazon to work, are there newer links?
3) Is there a version for Linux or will I have to get a Windoze computer just for this?
4) In AliExpress there are many of them with different software numbers. How do you know which one to get?
#47
Pole Position
Jim
Here is a good thread to review and yes it will work your LS as it does on mine. It is a Windows XP based software so no it will not work on Linux. The only version I know to stay away from is V13. I am running V12 on my laptop and my son has V15 on his.
Tech Stream Software Cable ver 2.0.4 - ClubLexus - Lexus Forum Discussion
Dennis
Here is a good thread to review and yes it will work your LS as it does on mine. It is a Windows XP based software so no it will not work on Linux. The only version I know to stay away from is V13. I am running V12 on my laptop and my son has V15 on his.
Tech Stream Software Cable ver 2.0.4 - ClubLexus - Lexus Forum Discussion
Dennis
#48
Instructor
I ordered this one on EBay
https://www.ebay.com/itm/12469237272...53.m2749.l2649
Hope its the right one. I dont understand the two circuit bords that are pictured but thats OK if it works.
https://www.ebay.com/itm/12469237272...53.m2749.l2649
Hope its the right one. I dont understand the two circuit bords that are pictured but thats OK if it works.
Last edited by jimisbell; 05-08-21 at 06:20 PM.
#49
Pole Position
Jim
You do realize that is being shipped out of China so it could be a few weeks or so before you receive it.
Dennis
You do realize that is being shipped out of China so it could be a few weeks or so before you receive it.
Dennis
#50
Instructor
Both cars are running fine right now so I am not worried....and I have the Sky Redline for backup if both went down........and a harem of widows that will carry me anywhere.LOL
#51
Pole Position
Jim
That will give you time to round up an old Windows XP Laptop.
Dennis
That will give you time to round up an old Windows XP Laptop.
Dennis
#52
Racer
iTrader: (1)
I ordered this one on EBay
https://www.ebay.com/itm/12469237272...53.m2749.l2649
Hope its the right one. I dont understand the two circuit bords that are pictured but thats OK if it works.
https://www.ebay.com/itm/12469237272...53.m2749.l2649
Hope its the right one. I dont understand the two circuit bords that are pictured but thats OK if it works.
#53
Bob
#55
Instructor
well, at least I got it from Ebay so I can return it if its not right. Usually I buy from AliExpress..direct from China, but this time I decided to play it safe because the price was only a few dollars different.
#56
I’m running version 12, I originally had just the 1.4.1 cable off eBay, it worked perfectly on my 2000 Avalon. It wouldn’t read live engine data on my 2014 ES350, it could set/customize options and program keys. I purchased a 2.0.4 from aliexpress for a much better price Than amazon or eBay., 37 usd. This version firmware reads live engine and transmission data. I currently possess both cables, 1.4.1 and 2.0.4, so I’m capable of trying both cables, I’m able to repair up to 2018, I may get version 14 or 15 one of these days.
#57
Pole Position
I do hope everything will go well for you. Installing TechStream sometimes can be a challenge. Do come back here if you run into problem, we can help. Once you get it going, you will like it. Good luck.
#58
It certainly looks that way doesn't it... I read an article from a company that sells Techstream and the cables. They said to keep trying different Techstream versions until you find one that works for you...wow
#59
Bob, you can not delete ALL the keys. You will need a master key to delete the keys and you can not delete the master key itself. So you always will have at least one working key. As I understand, you can programmed and designate two master keys, anything after that will be designated as sub keys. You can have total 4 keys in the system.
I was hoping to hear it would list the master keys plus the valet and wallet keys so I could select what I wanted to delete to free up a spot for the new key.
I finally looked... As you folks know that's not one of the option...I now have a plan though.
Bob
Thread
Thread Starter
Forum
Replies
Last Post