Go Back   Club Lexus Forums > Lexus Model Forums > SC Models > SC 430
Sign in using an external account
Register Forgot Password?

GloveBox Removal

Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
Old 05-24-13, 01:54 PM   #1
ShawnOk
Lead Lap
Trader Score: (0)
 
ShawnOk's Avatar
 
Join Date: Mar 2013
Location: Oklahoma
Posts: 747
Default GloveBox Removal

Anyone have any experience with removing the entire glove box? I want to be able to get behind it to run some wires, while avoiding the airbag unit, of course. I tried to remove the little twisty clips on the sides but it still didn't come loose and I don't want to apply too much pressure. Any pics or detailed instructions would be helpful. I don't want to end up inadvertently breaking any of the mounting clips for it. Thanks.
This ad is not displayed to registered members.
Register your free account today and become a member on Club Lexus!
ShawnOk is offline   Reply With Quote
Old 05-24-13, 02:41 PM   #2
mrblister
Lexus Champion
Trader Score: (0)
 
mrblister's Avatar
 
Join Date: Nov 2007
Location: Pa
Posts: 1,757
Default

Quote:
Originally Posted by ShawnOk View Post
Anyone have any experience with removing the entire glove box? I want to be able to get behind it to run some wires, while avoiding the airbag unit, of course. I tried to remove the little twisty clips on the sides but it still didn't come loose and I don't want to apply too much pressure. Any pics or detailed instructions would be helpful. I don't want to end up inadvertently breaking any of the mounting clips for it. Thanks.
http://www.clublexus.com/forums/sc-4...placement.html
[ This link has threads in it ]

http://lexus.sewellparts.com/oem-cat...C430-2002.html
[ this link shows the break down ]

Do a search there are a lot of posts reff this. You will have to remove the seat heater controls as well as other things to get to what you want. When I needed to run wires I just pushed them up and in from the outside of the glove box and this allowed me to get the wires into the glove box with out having to remove it. the sides of the console where it meets to the the top of the glove box has some play in it . I pressed it in and then put wires inside
__________________
2005 SC430 Pebble Beach nav tool back up camera vias sirius radio daizen front & rear anti sway greaseable zerks blitz throttle controler windscreen deflector 8 disk dvd trunk changer dvd/tv tuner in glove box r1 slotted & drilled rotors,axis pads 20 " donz genovese staggered toyo t1 proxies toms tower strut bar cnc aluminum frame stiffiner plates lux link remote start remote top 1/4 window mod phone hack & beat sonic nav overide lots of led bulbs lexus logo door projectors 2004 GX470

Last edited by mrblister; 05-24-13 at 02:44 PM..
mrblister is offline   Reply With Quote
Old 05-24-13, 02:56 PM   #3
ShawnOk
Lead Lap
Trader Score: (0)
 
ShawnOk's Avatar
 
Join Date: Mar 2013
Location: Oklahoma
Posts: 747
Default

Quote:
Originally Posted by mrblister View Post
http://www.clublexus.com/forums/sc-4...placement.html
[ This link has threads in it ]

http://lexus.sewellparts.com/oem-cat...C430-2002.html
[ this link shows the break down ]

Do a search there are a lot of posts reff this. You will have to remove the seat heater controls as well as other things to get to what you want. When I needed to run wires I just pushed them up and in from the outside of the glove box and this allowed me to get the wires into the glove box with out having to remove it. the sides of the console where it meets to the the top of the glove box has some play in it . I pressed it in and then put wires inside
Thanks MrBlister, sorry didn't read it fully. I understand how to disassemble the center console. I'm looking to drill into the side of the glove box so I can install an aux input jack into it. Removing the entire thing will give me more room and prevent the drill chuck from scratching the upper portion of the glove box. If this makes sense. Anyone got an idea how to drop it down to be removed?

Last edited by ShawnOk; 05-24-13 at 03:03 PM..
ShawnOk is offline   Reply With Quote
Old 05-24-13, 03:22 PM   #4
fj40ih8mud
Pole Position
Trader Score: (0)
 
Join Date: Jul 2012
Location: ks
Posts: 218
Default

YES, TURN THE TWO LITTLE *****, then they should pull straight out that would be toward the center of the glove box. I used a small screwdriver to pry them a little. Hopefully that give you the access you need. Change the filter on the air box when you are in there.

I am thinking that if you want to remove it entirely, you have to take out the center console. But I could be wrong.

Then there are two screws under the box on the far left and right that are 10mm that have to be removed for the hinge portion. on the right it is under the door trim near the gasket (in the door jam). On the left it was near the center. Once you get those out, you take off the wires then it should all come out.

Good luck
fj40ih8mud is offline   Reply With Quote
Old 05-24-13, 03:35 PM   #5
mrblister
Lexus Champion
Trader Score: (0)
 
mrblister's Avatar
 
Join Date: Nov 2007
Location: Pa
Posts: 1,757
Default

Quote:
Originally Posted by ShawnOk View Post
Anyone have any experience with removing the entire glove box? I want to be able to get behind it to run some wires, while avoiding the airbag unit, of course. I tried to remove the little twisty clips on the sides but it still didn't come loose and I don't want to apply too much pressure. Any pics or detailed instructions would be helpful. I don't want to end up inadvertently
breaking any of the mounting clips for it. Thanks.

In the owners manual there us a section there how to
Change the cabin air filter you will need to read that
Them once you have the glove box in it's
Extended position and the stays that hold it up
Are removed ( they come out of the way during
The cabin filter removal) you will find approx 4 to 5
Bolts or phillips head screws when you remove
Them the entire glove box will be removable
You nay have to un plug light ?
mrblister is offline   Reply With Quote
Old 05-24-13, 03:35 PM
 
 
 
 
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Any recommendations for removing the trunk liner to access rear shock upper mounts? BayAreaLex GS - Second Generation 3 12-05-12 03:21 PM
Sail Panel Removal - Help Needed Today tahiles LS430 0 09-29-12 05:49 AM
Floor Mat Clip Removal dawg GX - Second Generation 6 09-21-12 12:33 PM
How to remove glove box ae80siq LS400 5 09-03-10 06:09 AM
Removing cover for rear interior light jay33 LS430 1 09-08-09 10:19 PM


Tags
2007, box, console, glove, glove box, gx470, gx570, leaxus, lexus, out, remove, sc430

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

All times are GMT -7. The time now is 09:03 AM.

Join ClubLexus
Advertising


Copyright © 2000-2008 Internet Brands, Inc. All Rights Reserved
Privacy Policy | Disclaimer | Terms of Use | JOBS


Get all contact info