New SC430 member from Denmark
#32
#33
Talking about some fresh cold air for your engine, I have an Injen CAI, typical install in the bay. I designed a simple diverter for the air in the grill to allow some of the fresh air to go directly into the path of the Injen filter. I do not know if it works but I would think it does. It is like a scoop that diverts the air to go on the left headlamp and into the engine bay bypassing the radiator.
#34
Pole Position
@ Mandy
Aye, I do get the objective, and that we're working on the assumption that cold fresh air is better than warm air.
However it would be nice to see some empirical evidence as to whether it makes a real difference. +2-4bhp is borderline worthwhile I think for the effort involved.
Aye, I do get the objective, and that we're working on the assumption that cold fresh air is better than warm air.
However it would be nice to see some empirical evidence as to whether it makes a real difference. +2-4bhp is borderline worthwhile I think for the effort involved.
#35
A true CAI can increase HP. Discussions on how much, should be left for others.
I am in it for the sound mainly and this DIY is so simple and straighforward. Also eliminates clutter.
Afforded me the chance to clean the throttle body as well.
All in all a thumbs up!
For $180, I give it an A.
I am in it for the sound mainly and this DIY is so simple and straighforward. Also eliminates clutter.
Afforded me the chance to clean the throttle body as well.
All in all a thumbs up!
For $180, I give it an A.
#36
Here's my set up, sorry for the bling-bling...
#37
I think its time for a little x-mas update. Been a long time and there have been alot going on here. Have had my LS400 for sale for a long time now and finally got i traded with another car plus money. So now i have a 86' MR2 AW11. Now see, thats a go-cart Pretty fun to drive with the engine right behind you. Well i have used a couple of weeks to get it up running so the SC have just beeen waiting for some more parts.
Just got my G-Answer lip kit home from Japan. Woow the import tax almost killed me I have really spend alot of money lately on this project. But there is no turning back now, and i aint thinking about that at all so dont worry
The fitment is actually really good i must say So thats good quality.
Also have been working alot on the headlight fitment. That was very time consuming i must say, but the result pays off. Actually i think its going to look even better than some of the close ups i have seen of the 06+ bumper
Need to modificate the numberplate things to match the euro specs.
I got all my Samco hoses and cut everything to fit. It was hard to get everything to work but i think the result got pretty good.
Also got new brackets and bolts for the cooler. Wasnt satisfied with the paint, so i gave them some extra coats. I dont want to see any rust on my car.
I got everything out from the interior. All the wood parts is getting real carbon wrapped around them. And also got a little surprise in the center console, but will not tell more about that yet
And FINALLY after searching for months, i found the big Brembo Ferrari F50 14" kit. Everything is getting dissasembled and powdercoated Look at these bad boys
The rear tires arrived. 315/25-19. Holly .... these are wide You can also spot the MR2 in the background for size comparing haha
Well the money i got in the trade for the LS400 is already spend on Universal Airride System. So my BC-Racing coilover kit is getting modificated by Zack from UAS right now so i'm looking to spend alot of time installing this system in the near future. Ordered the wifi mudule so i can adjust the height from my iphone Thats badass.
Stay tuned
Just got my G-Answer lip kit home from Japan. Woow the import tax almost killed me I have really spend alot of money lately on this project. But there is no turning back now, and i aint thinking about that at all so dont worry
The fitment is actually really good i must say So thats good quality.
Also have been working alot on the headlight fitment. That was very time consuming i must say, but the result pays off. Actually i think its going to look even better than some of the close ups i have seen of the 06+ bumper
Need to modificate the numberplate things to match the euro specs.
I got all my Samco hoses and cut everything to fit. It was hard to get everything to work but i think the result got pretty good.
Also got new brackets and bolts for the cooler. Wasnt satisfied with the paint, so i gave them some extra coats. I dont want to see any rust on my car.
I got everything out from the interior. All the wood parts is getting real carbon wrapped around them. And also got a little surprise in the center console, but will not tell more about that yet
And FINALLY after searching for months, i found the big Brembo Ferrari F50 14" kit. Everything is getting dissasembled and powdercoated Look at these bad boys
The rear tires arrived. 315/25-19. Holly .... these are wide You can also spot the MR2 in the background for size comparing haha
Well the money i got in the trade for the LS400 is already spend on Universal Airride System. So my BC-Racing coilover kit is getting modificated by Zack from UAS right now so i'm looking to spend alot of time installing this system in the near future. Ordered the wifi mudule so i can adjust the height from my iphone Thats badass.
Stay tuned
Last edited by Rollaboy; 03-18-13 at 11:40 AM.
#41
Intermediate
I think its time for a little x-mas update. Been a long time and there have been alot going on here. Have had my LS400 for sale for a long time now and finally got i traded with another car plus money. So now i have a 86' MR2 AW11. Now see, thats a go-cart Pretty fun to drive with the engine right behind you. Well i have used a couple of weeks to get it up running so the SC have just beeen waiting for some more parts.
Just got my G-Answer lip kit home from Japan. Woow the import tax almost killed me I have really spend alot of money lately on this project. But there is no turning back now, and i aint thinking about that at all so dont worry
The fitment is actually really good i must say So thats good quality.
Also have been working alot on the headlight fitment. That was very time consuming i must say, but the result pays off. Actually i think its going to look even better than some of the close ups i have seen of the 06+ bumper
Need to modificate the numberplate things to match the euro specs.
I got all my Samco hoses and cut everything to fit. It was hard to get everything to work but i think the result got pretty good.
Also got new brackets and bolts for the cooler. Wasnt satisfied with the paint, so i gave them some extra coats. I dont want to see any rust on my car.
I got everything out from the interior. All the wood parts is getting real carbon wrapped around them. And also got a little surprise in the center console, but will not tell more about that yet
And FINALLY after searching for months, i found the big Brembo Ferrari F50 14" kit. Everything is getting dissasembled and powdercoated Look at these bad boys
The rear tires arrived. 315/25-19. Holly .... these are wide You can also spot the MR2 in the background for size comparing haha
Well the money i got in the trade for the LS400 is already spend on Universal Airride System. So my BC-Racing coilover kit is getting modificated by Zack from UAS right now so i'm looking to spend alot of time installing this system in the near future. Ordered the wifi mudule so i can adjust the height from my iphone Thats badass.
Stay tuned
Just got my G-Answer lip kit home from Japan. Woow the import tax almost killed me I have really spend alot of money lately on this project. But there is no turning back now, and i aint thinking about that at all so dont worry
The fitment is actually really good i must say So thats good quality.
Also have been working alot on the headlight fitment. That was very time consuming i must say, but the result pays off. Actually i think its going to look even better than some of the close ups i have seen of the 06+ bumper
Need to modificate the numberplate things to match the euro specs.
I got all my Samco hoses and cut everything to fit. It was hard to get everything to work but i think the result got pretty good.
Also got new brackets and bolts for the cooler. Wasnt satisfied with the paint, so i gave them some extra coats. I dont want to see any rust on my car.
I got everything out from the interior. All the wood parts is getting real carbon wrapped around them. And also got a little surprise in the center console, but will not tell more about that yet
And FINALLY after searching for months, i found the big Brembo Ferrari F50 14" kit. Everything is getting dissasembled and powdercoated Look at these bad boys
The rear tires arrived. 315/25-19. Holly .... these are wide You can also spot the MR2 in the background for size comparing haha
Well the money i got in the trade for the LS400 is already spend on Universal Airride System. So my BC-Racing coilover kit is getting modificated by Zack from UAS right now so i'm looking to spend alot of time installing this system in the near future. Ordered the wifi mudule so i can adjust the height from my iphone Thats badass.
Stay tuned
#42
Thanks guys. 2013 sure is gonna get exciting for me and my SC
Well.. Santa was a few days late this year because he had to stop by in Japan first. But when he arrived he had some real nice rims on his sleigh Thanks alot Santa
Work VS XX 9x19 and 12,5x19. The small lip on the front is to clear the big Brembo brakes. The big lip in the rear... Thats just crazy Cant wait to testfit these (and do some fender modding) . Also got my Behrman fenders with integrated blinkers. Really nice stuff
Grab a coke
I also got this TPMS system. I know many of you hate TPMS but have tried leaking on 20"s before and i found this monitoring system that is not just a bulb. I can see tire pressure on the screen for each wheel. It will also beep when pressure is too low. The system can be programmed to what pressure you like.
Here you can see the extra hole in the rim on the back where i am gonna install the sensors. Because of my 3 piece wheel setup i cannot use the "normal" hole (as seen on the bottom in the picture) because the tpms sensor would then sit vertical pointing toward the tire and will break.
Heres the duct and integrated blinkers for the Behrman fenders. Looks sweet.
Got my custom brackets from Universal airride system. Have been painting them with some fat black color to match the rest of the BC suspension.
And finally some parts of my new custom exhaust system. Got the PPE headers from the groupbuy here on CL The magnaflow XL rear mufflers and the Megan downpipe. My mail forwarder shipped the wrong package so instead of the middle pipe i've got a guitar and an amplifier So i have shipped it back and waiting for them to find out where my middle pipe is during all the christmas madness.
I will begin to install some of this the upcoming weeks.
Happy new year everyone
Well.. Santa was a few days late this year because he had to stop by in Japan first. But when he arrived he had some real nice rims on his sleigh Thanks alot Santa
Work VS XX 9x19 and 12,5x19. The small lip on the front is to clear the big Brembo brakes. The big lip in the rear... Thats just crazy Cant wait to testfit these (and do some fender modding) . Also got my Behrman fenders with integrated blinkers. Really nice stuff
Grab a coke
I also got this TPMS system. I know many of you hate TPMS but have tried leaking on 20"s before and i found this monitoring system that is not just a bulb. I can see tire pressure on the screen for each wheel. It will also beep when pressure is too low. The system can be programmed to what pressure you like.
Here you can see the extra hole in the rim on the back where i am gonna install the sensors. Because of my 3 piece wheel setup i cannot use the "normal" hole (as seen on the bottom in the picture) because the tpms sensor would then sit vertical pointing toward the tire and will break.
Heres the duct and integrated blinkers for the Behrman fenders. Looks sweet.
Got my custom brackets from Universal airride system. Have been painting them with some fat black color to match the rest of the BC suspension.
And finally some parts of my new custom exhaust system. Got the PPE headers from the groupbuy here on CL The magnaflow XL rear mufflers and the Megan downpipe. My mail forwarder shipped the wrong package so instead of the middle pipe i've got a guitar and an amplifier So i have shipped it back and waiting for them to find out where my middle pipe is during all the christmas madness.
I will begin to install some of this the upcoming weeks.
Happy new year everyone
#43
Instructor
Hi Michael
This build is looking awesome. Love those wheels.
Did you get your bags from UAS? If so what did you get?
Maybe you should have kept the guitar and amplifier and written a song about the build when it's done. lol
Keep the pictures coming.
Best regards
Steve
This build is looking awesome. Love those wheels.
Did you get your bags from UAS? If so what did you get?
Maybe you should have kept the guitar and amplifier and written a song about the build when it's done. lol
Keep the pictures coming.
Best regards
Steve
#44
I hope i get the rest of my exhaust soon. There is enough to begin with but i need the exhaust setup finished so i can make my trunk space bigger to fit the air tank and spare wheel
Everything is from UAS. I wrote alot with zack and i told him i would like to have the comfort simillar to my buddys 2001 S500. He said that if i wanted more soft bags it would be a floating ride like and old cadillac or something and bad handling and they dont have that bags. So i hope i can use the ones i got from him. I know i am gonna need a lot of adjusting on the BC coilover height and hardness and on how much air is going to be ind the bags to get the best comfort and fitment of the wheels.
I know there arent much progress going on right now on the pictures, im just happy with all the new stuff i got so i had to post pics
But it sure is a big puzzle
#45
Instructor
Haha Steve, yeah but the only thing i can play on is the V8 out front with my right foot tapping the speeder pedal
I hope i get the rest of my exhaust soon. There is enough to begin with but i need the exhaust setup finished so i can make my trunk space bigger to fit the air tank and spare wheel
Everything is from UAS. I wrote alot with zack and i told him i would like to have the comfort simillar to my buddys 2001 S500. He said that if i wanted more soft bags it would be a floating ride like and old cadillac or something and bad handling and they dont have that bags. So i hope i can use the ones i got from him. I know i am gonna need a lot of adjusting on the BC coilover height and hardness and on how much air is going to be ind the bags to get the best comfort and fitment of the wheels.
I know there arent much progress going on right now on the pictures, im just happy with all the new stuff i got so i had to post pics
But it sure is a big puzzle
I hope i get the rest of my exhaust soon. There is enough to begin with but i need the exhaust setup finished so i can make my trunk space bigger to fit the air tank and spare wheel
Everything is from UAS. I wrote alot with zack and i told him i would like to have the comfort simillar to my buddys 2001 S500. He said that if i wanted more soft bags it would be a floating ride like and old cadillac or something and bad handling and they dont have that bags. So i hope i can use the ones i got from him. I know i am gonna need a lot of adjusting on the BC coilover height and hardness and on how much air is going to be ind the bags to get the best comfort and fitment of the wheels.
I know there arent much progress going on right now on the pictures, im just happy with all the new stuff i got so i had to post pics
But it sure is a big puzzle
Can't wait to see this build unfold. You have plenty of work to do.
The bags I have from UAS are Sport Bags and pretty firm, so I will be very interested to see how your setup goes and how you adjust the coils etc to get the ride you want.
Also looking forward to seeing what you do with the trunk, sounds awesome.
Best regards and Happy New Year.
Steve