Metal Pedals Installed w/pics
#47
EV ftw!!!
Originally Posted by Pearlpower
Yes, the SC430 gas pedal is plastic as well which is why I recommend removing the pedal to install the new pedal. Things are tight in that corner IMO to get an accurate alignment. Also the back of the pedal has those plastic ridges so alignment is very critical. The gas pedal is the most difficult in the install.
The parking brake is a tad small IMO but fits fine. Be careful. As they say, "measure twice, drill once".
The parking brake is a tad small IMO but fits fine. Be careful. As they say, "measure twice, drill once".
#49
did the install this evening. Everything went well. I just need to get a smaller drill to be able to drill the 2 top holes on the brake pedal at the proper angle. Otherwise I am still a little concerned that the dead pedal is a little large. I measured it and it is 8 5/8 x 3 1/4 or so. I checked ebay to see the measurements for the sc430 dead pedal, but he is no longer selling them for the sc430. I found 2 other sets, one for the es and one for the gs. Both are 8 5/8 by 3 1/4. Is everyones dead pedal this size?
#50
I got mine installed tonight. Pics to fillow. I am very happy with them . A fellow CL member put them on for me. He has (3) SC-400's, he was also pleased with the kit. It rained heavy tonight... wet shoes are no problem.
I did not measure the dead pedal. Yet!
I did not measure the dead pedal. Yet!
#51
How did you guys choose to afix the dead pedal? With the screws or carpet tape?
If someone can put my mind at ease with the measurements for the dead pedal I would appreciate it. I think I may have gotten one from another model?
Thanks,
Mario
If someone can put my mind at ease with the measurements for the dead pedal I would appreciate it. I think I may have gotten one from another model?
Thanks,
Mario
#54
Sc430 Pedals
I made a templete for the pedals , copied the back , attached and drilled......
I like the dead plate, raised it about 3/16 from the bottom for the carpet , this will keep the ecru carpet cleaner in this area with this larger pad.......
I thought the acc pedal was the easiest, the brake pedal is really a small surface area..
I will get some black factory mats, instead of the ecru with the clear protectors I have....
Gee-Bee
I like the dead plate, raised it about 3/16 from the bottom for the carpet , this will keep the ecru carpet cleaner in this area with this larger pad.......
I thought the acc pedal was the easiest, the brake pedal is really a small surface area..
I will get some black factory mats, instead of the ecru with the clear protectors I have....
Gee-Bee
#55
Moderator
iTrader: (1)
It's been three and a half years but I've saved this post along with my aluminum pedals to install that I never did on my last 02 red/ecru SC. Just finished 3/4 pedals tonight on my 2005 PB and I am very pleased with the quality, look and install procedures. Thanks to PearlPower for starting this great thread and inspiring us all to do this mod.
Attached are some pics. Finished product hopefully tomorrow. I have a 18V battery powered drill and my hands/arms are sore like crazy from drilling.
I may have some small issues to correct: E-Brake pedal has only one screw because I couldn't get the holes to line up on that small of a surface to drill and be straight. It doesn't move and is very tight (not like you use this pedal regularly anyway) so I am not too worried. The dead pedal bottom right screw doesn't seem like it is drilled into anything and I can pull it out with my hands. Other screws on the dead pedal are very secure but this one is not. I may try a longer screw or some lock tight or something.
This set is a very nice quality, inexpensive upgrade and another way to modernize your SC with other performance luxury cars today.
Attached are some pics. Finished product hopefully tomorrow. I have a 18V battery powered drill and my hands/arms are sore like crazy from drilling.
I may have some small issues to correct: E-Brake pedal has only one screw because I couldn't get the holes to line up on that small of a surface to drill and be straight. It doesn't move and is very tight (not like you use this pedal regularly anyway) so I am not too worried. The dead pedal bottom right screw doesn't seem like it is drilled into anything and I can pull it out with my hands. Other screws on the dead pedal are very secure but this one is not. I may try a longer screw or some lock tight or something.
This set is a very nice quality, inexpensive upgrade and another way to modernize your SC with other performance luxury cars today.
#57
Moderator
iTrader: (1)
Well...here you go...project for you! Do you and your dad's new LS at once!
They are on eBay for $59 plus shipping...$74 total. Very nice, inexpensive upgrade. Great quality on the pedals...MUCH MUCH MUCH better than those PepBoys or Autozone generic medal pedals for $10! LOL Plus the logo is awesome too, especially with a black car!
They are on eBay for $59 plus shipping...$74 total. Very nice, inexpensive upgrade. Great quality on the pedals...MUCH MUCH MUCH better than those PepBoys or Autozone generic medal pedals for $10! LOL Plus the logo is awesome too, especially with a black car!