?How to change the dash wood trim piece on a 97? Vent replacement.
#5
#6
Well if you read my post well enough you would see my car is a 97 and this is not the same dash configuration as the early cars with the multi piece dash which is NOT the same as all of the search results so next time you want to Join the search police so early on make sure that you have all your bearings straight first before you inject your baseless opinion
#7
Well if you read my post well enough you would see my car is a 97 and this is not the same dash configuration as the early cars with the multi piece dash which is NOT the same as all of the search results so next time you want to Join the search police so early on make sure that you have all your bearings straight first before you inject your baseless opinion
Trending Topics
#8
Lexus Champion
iTrader: (4)
There is 5 nuts, 3 around the glove box lock, 2 under airbag. Take out center consol and the lower paneling under g-box and g-box. It will simplify things so much. The nuts are 10mm. I recent a ratcheting wrench for a couple. Or loosten them then remove with socket and fingers! Then it just pulls out. Unbolt vent from wood, dont forget the 4 lil baby screws. Thats a brief lil summary, enjoy!
#9
There is 5 nuts, 3 around the glove box lock, 2 under airbag. Take out center consol and the lower paneling under g-box and g-box. It will simplify things so much. The nuts are 10mm. I recent a ratcheting wrench for a couple. Or loosten them then remove with socket and fingers! Then it just pulls out. Unbolt vent from wood, dont forget the 4 lil baby screws. Thats a brief lil summary, enjoy!
Thread
Thread Starter
Forum
Replies
Last Post
xspsi6
SC- 1st Gen (1992-2000)
12
03-02-11 01:32 AM