SC400 Passenger airbag into SC300
#1
Pole Position
Thread Starter
iTrader: (7)
Join Date: Oct 2008
Location: Arizona
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
SC400 Passenger airbag into SC300
How should I make this work? Obviously the two airbags are different. The tan one is from a 1993 SC300.
And the black airbag is from a SC400, not sure of the year I do know its pre 1997 though.
Currently my passenger side airbag harness is in half. My tire ate through it, so in all reality my airbag wouldn't work even if it was plugged in. I am planning on rerouting it, and fixing the harness so its whole again.
What are my options? Should I dye the tan bag black? Or could I cut and splice the connectors? Or would the bag blow in my face?
Thanks.
And the black airbag is from a SC400, not sure of the year I do know its pre 1997 though.
Currently my passenger side airbag harness is in half. My tire ate through it, so in all reality my airbag wouldn't work even if it was plugged in. I am planning on rerouting it, and fixing the harness so its whole again.
What are my options? Should I dye the tan bag black? Or could I cut and splice the connectors? Or would the bag blow in my face?
Thanks.
#3
Pole Position
Thread Starter
iTrader: (7)
Join Date: Oct 2008
Location: Arizona
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
No one has any suggestions?
I'm starting to wonder if the tan bag I have is a single stage airbag, and if the black one is a stage two. So if I made the connectors matched, (ie; cut and spliced) it still wouldn't be compatible because of the airbag differences?
Anyone?
I'm starting to wonder if the tan bag I have is a single stage airbag, and if the black one is a stage two. So if I made the connectors matched, (ie; cut and spliced) it still wouldn't be compatible because of the airbag differences?
Anyone?
#5
Lexus Fanatic
iTrader: (13)
How should I make this work? Obviously the two airbags are different. The tan one is from a 1993 SC300.
And the black airbag is from a SC400, not sure of the year I do know its pre 1997 though.
Currently my passenger side airbag harness is in half. My tire ate through it, so in all reality my airbag wouldn't work even if it was plugged in. I am planning on rerouting it, and fixing the harness so its whole again.
What are my options? Should I dye the tan bag black? Or could I cut and splice the connectors? Or would the bag blow in my face?
Thanks.
And the black airbag is from a SC400, not sure of the year I do know its pre 1997 though.
Currently my passenger side airbag harness is in half. My tire ate through it, so in all reality my airbag wouldn't work even if it was plugged in. I am planning on rerouting it, and fixing the harness so its whole again.
What are my options? Should I dye the tan bag black? Or could I cut and splice the connectors? Or would the bag blow in my face?
Thanks.
A 99 SC300 has a 3-spoke steering wheel, the 93 SC400 has a 4-spoke. Or are you talking passenger side?
Jonny
Thread
Thread Starter
Forum
Replies
Last Post