I need help
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2014
Location: texas
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I need help
I have 2 clusters, one has no fuel needle and the needles for the tach, speedo and temp don't light up. On the second cluster all the needles light up but the speedometer only goes to 20 mph and stops there, I was wondering if I can just pull the needles off the good cluster and place them on my old cluster that has the working speedo? Is this possible with the needles still lighting up after the switch?
#2
Pole Position
i have swapped needles and it has worked for me, but on the ones that light up i suggest playing around with them abit and before you install into the dash make sure the needle isnt too below the zero or it will get stuck.
#3
Pole Position
Send the "best" one to Tanin Auto and let Jason restore it...... You will be happy....
http://www.taninautoelectronix.com/L...ter_repair.htm
http://www.taninautoelectronix.com/L...ter_repair.htm
Thread
Thread Starter
Forum
Replies
Last Post
amicrazy
SC- 1st Gen (1992-2000)
13
10-04-14 04:18 PM