97+ Instrument Cluster swap to a 92 SC
#16
Lead Lap
iTrader: (2)
i got a 97 manual cluster to work on my 92 sc400 with 1jz swap. the only thing i have not been able to get to work is the speed output from cluster to ECU to clear the speed signal code nor the gas mileage calculation from the drive computer in the cluster (i did tap into injector 1)
has anyone got those functions to work? i would like to compare pinouts. otherwise feel free to pm me about what wires splice where. i just spliced the wires at the gauge cluster level, without removing the whole harness.
cheers
Marko
has anyone got those functions to work? i would like to compare pinouts. otherwise feel free to pm me about what wires splice where. i just spliced the wires at the gauge cluster level, without removing the whole harness.
cheers
Marko
#17
from what i can tell. most of the wires are the same color. im avoiding looking at the PRND2L wires, ECT, and other automatic related functions to clear up the chart. but its so depressing to look at it.
i hate wiring work. im so close to just sending my cluster out for repair and selling this 97 one. ugh.
i hate wiring work. im so close to just sending my cluster out for repair and selling this 97 one. ugh.
#19
Lexus Test Driver
iTrader: (4)
It's just something that should take a little time, but can't be hard. Doesn't the later cluster have ambient temp? Are you having to add a sensor? This is something I plan to do when I find a new shell since I have a 97 5spd cluster, just figured I'd figure it out when the time comes.
Estomax, you have a manual ecu or auto? Jzx100 manual ecu never threw speed or sub tps or fuel ecu codes, both auto jzx100 and soarer ecus did. Wonder if the auto ecu counts on a speed sensor internal to the auto?
Estomax, you have a manual ecu or auto? Jzx100 manual ecu never threw speed or sub tps or fuel ecu codes, both auto jzx100 and soarer ecus did. Wonder if the auto ecu counts on a speed sensor internal to the auto?
#28
Not the motor, the main circuit board assembly which is easier said than done.
It would be easier to just find the another SC300 cluster.
It would be easier to just find the another SC300 cluster.
__________________
TANIN AUTO ELECTRONIX
262-456-4147
contact@taninauto.com
www.taninautoelectronix.com
TANIN AUTO ELECTRONIX
262-456-4147
contact@taninauto.com
www.taninautoelectronix.com
Thread
Thread Starter
Forum
Replies
Last Post
suprandsc
Performance & Maintenance
4
02-20-13 11:10 AM