LED swap questions
#1
Lexus Champion
Thread Starter
LED swap questions
Hey guys, Im planning to replace all the lights with LEDs. I wanna get a new flasher right away though so I don't have hyper blinking Lights. So my questions are what type of flasher goes in a 92 sc400? Where have you guys bought them (if you have)? And where is it in the car?
Thanks
Thanks
#3
Lexus Champion
iTrader: (10)
Just scroll down on the first post you'll see the digital flasher I used to prevent the hyper blinking with the LED bulbs.
https://www.clublexus.com/forums/bui...lue-flame.html
https://www.clublexus.com/forums/bui...lue-flame.html
Last edited by OG Dada; 02-03-14 at 10:06 AM.
#4
Lexus Champion
Thread Starter
i noticed the one you have ends in GL02, but i could only find JL02. you think it will be the same?
http://www.diodedynamics.com/store/c...er-module.html
http://www.diodedynamics.com/store/c...er-module.html
#5
Lexus Champion
iTrader: (10)
http://www.superbrightleds.com/morei...asher/782/836/Here is where I bought mine. There's a way to cross reference it, there's actually a diagram on the flasher itself that shows letters and numbers for each terminal, it should just match the digital one and you're good.
#6
Lexus Champion
Thread Starter
Sweet, thanks man, gonna order that right now. Did u order the lights at the same place? I haven't had any trouble with eBay so I'll see what I can find first
Trending Topics
#9
X2 on the superbrightleds. I've bought wayyyy to much stuff from there over the years - they also have good customer service - I've had fast response using their pre-sales chat window...
I'm going to get that flasher, too...
I'm going to get that flasher, too...
#10
Oh and to the OP, I looked around some posts and I'm pretty sure the flasher is in the driver side foot well on the left side - open that little access door and you'll see it. I'd look at mine but my wife took it to work...
#11
Driver School Candidate
I have a 93 400 and was unable to get any replacement flashers to work when I changed all my lights out for LEDs. I ended up having to modify the existing flasher unit. I'll post some steps if a replacement fails to work for you.
#13
Lexus Champion
Thread Starter
Sweet thanks guys. Any tips on getting the flasher out? Wow that thing is ticked away deep. im gonna have to use some pliers cz I can't get enough grip to even nudge it a little.
#14
Driver School Candidate
There is a small release towards the firewall that that catches the flasher unit. It needs to be pushed towards the firewall to release it. After a few times of taking mine out I was able to get it with just my hand, but the first few times I used a rubberized grip for opening jars. Hope this helps and good luck.