xspsi6

iTrader: (31)

Which lines exactly need replaced when doing the swap and I assume I would be using the same condensor?

I hear different things when searching so I would like to hear 1st hand from somebody that has done this.

I am thinking the lines from the condensor/reciever drier to the a/c compressor.

el400

here a link to a fellow members build of a sc400 with a gte swap in it.hopefully it helps https://www.clublexus.com/forums/sc-...ka-my-sc4.html

aliga

iTrader: (147)

you need the two lines to compressor, and the long line that does under rad/condensor.

i have both if you need.

xspsi6

iTrader: (31)

Ok I have all but the rubber lines that go to the compressor lmk how much for those please.

lexforlife

iTrader: (7)

dont forget suction hose from firewall to connect to line from compressor.. i just did gs400 2jzgtevvti swap and thats what i needed

xspsi6

iTrader: (31)

gs400 swap?

lexforlife

iTrader: (7)

in other words , the motor swap i did in the gs400 and replacing that with 2jzgte vvti motor is the same basic concept as you swapping 2j into sc 400