recaro Seats for the sc300
#1
Pole Position
Thread Starter
iTrader: (4)
Join Date: Nov 2005
Location: ID
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
recaro Seats for the sc300
Hey, I was just wondering would i be able to take the seats out of a evo8 take off the stock brackets an put some on to fit the sc300 seat pattern?
#2
1JZ Single SC400
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
I am sure anything is possible. Not for sure exactly if they will fit, but I do know the TT Supra's will, but you will lose the power features, and also the S2000 seats will work also, with the help of some new washers.
#3
thanks
#4
I read that the S2k seats will work for our cars as well. I found the info on www.intellexual.net. IIRC the S2k seats no longer have the power options. What I'd really like to know is what the weights are for the different seats. I'm sure that the stockers weigh a ton.
Trending Topics
#8
Rookie
iTrader: (1)
Join Date: Jun 2003
Location: Hawaii
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Yes, I recommend the brackets and sliders from Wedge Engineering. I have a set of EVO seats that I put into my SC. I spoke to Wendell who made me a custom/adjustable set because the stock MKIV Supra sliders and brackets sit a bit too low for me. I like the EVO Recaros except that there is no reclining lever so whenever I want to get to the rear seat I have to hand crank the seat into position. Let me know if you have any further questions.
Last edited by ttsukamoto; 05-05-09 at 05:42 AM.
#12
Lexus Test Driver
iTrader: (5)
Join Date: Apr 2002
Location: NY
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
just a though
Anyone ever try drafting the seats from another car on to the SC's seat frames?
The back of the sc seat already has a plastic cover, so if can cover up what ever method you used to draft on the new seats...
and you retain the stock seat motors, and memory switches
Anyone ever try drafting the seats from another car on to the SC's seat frames?
The back of the sc seat already has a plastic cover, so if can cover up what ever method you used to draft on the new seats...
and you retain the stock seat motors, and memory switches
#14
Pole Position
iTrader: (5)
was it 3am?
http://www.youtube.com/watch?v=kuABGbLCBfs
(Somewhat drunk over here, thus the randomness.)
http://www.youtube.com/watch?v=kuABGbLCBfs
(Somewhat drunk over here, thus the randomness.)
Last edited by GZZ-TT; 02-28-10 at 12:21 AM.