all my upgrade for my lover~~~
#47
Driver School Candidate
Join Date: May 2013
Location: TX
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Damn dude! I would pay you to do mine if you were any closer! hehehe but you are one brave young man! Nice job you did there. Oh and on the video thing, no worries. What you just did do your RX is 1000x harder than posting a video! Job well done mannn!!!
#48
Hey man,
First off, thank you for taking the time to post what you have. You've totally inspired me.
I just recently bought a 2010 RX450h AWD it has the Premium Package including HUD, intuitive parking assist, 12-speaker premium sound with Nav. Moonroof, rear camera. HID adaptive headlights, heated side mirrors with memory and auto-dim.
The morning after I got it, I went to the car to find my drivers side mirror knocked all the way forward. There was some lovely white paint transferred onto the mirror when it got hit. Luckily, it wasn't damaged and the paint mostly came off. That being said, after getting the mirror hit I want to install power folding mirrors.
On to my questions....
After reading your post I decided to see if I could install the mirrors with the side cameras. Thus far I have the driver side door switch for the folding mirrors. The mirrors with cameras are on their way; along with the new steering pad with the side camera control.
Do I have to buy the advanced parking assist ECU in order to get the side cameras working? Is there anything else I'd need to get it all working? is there re-wrinig required? I'm really nervous about doing this, but I really want to try. So any help or advice you could provide me would be most appreciated.
Also,(I'm not sure if you can help with this one) I got the interior rearview mirror with the Auto-Highbeem camera for really cheap. However the connector in my RX is too small (not enough wires) to hook to the new Mirror. I went ahead and ordered a new Roof Wire#1 which should have the correct connector. Do you know if it is an easy swap of the wire and it will work? or do I have run new wiring? I don't know if the ECU will even work with it. again I would be most grateful with any advice you can provide.
First off, thank you for taking the time to post what you have. You've totally inspired me.
I just recently bought a 2010 RX450h AWD it has the Premium Package including HUD, intuitive parking assist, 12-speaker premium sound with Nav. Moonroof, rear camera. HID adaptive headlights, heated side mirrors with memory and auto-dim.
The morning after I got it, I went to the car to find my drivers side mirror knocked all the way forward. There was some lovely white paint transferred onto the mirror when it got hit. Luckily, it wasn't damaged and the paint mostly came off. That being said, after getting the mirror hit I want to install power folding mirrors.
On to my questions....
After reading your post I decided to see if I could install the mirrors with the side cameras. Thus far I have the driver side door switch for the folding mirrors. The mirrors with cameras are on their way; along with the new steering pad with the side camera control.
Do I have to buy the advanced parking assist ECU in order to get the side cameras working? Is there anything else I'd need to get it all working? is there re-wrinig required? I'm really nervous about doing this, but I really want to try. So any help or advice you could provide me would be most appreciated.
Also,(I'm not sure if you can help with this one) I got the interior rearview mirror with the Auto-Highbeem camera for really cheap. However the connector in my RX is too small (not enough wires) to hook to the new Mirror. I went ahead and ordered a new Roof Wire#1 which should have the correct connector. Do you know if it is an easy swap of the wire and it will work? or do I have run new wiring? I don't know if the ECU will even work with it. again I would be most grateful with any advice you can provide.
#49
Driver School Candidate
Join Date: Feb 2016
Location: CA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Could you please guide me step by step to install 2010 RX350 passenger side view monitor. I have bought OEM side camera and steering button but I don't know how to connect them. Please guide me the wire. Where to start and where to end? I really need your help. Thanks for your respond.
#50
Driver School Candidate
Join Date: Feb 2016
Location: CA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Side View Monitor RX350 2010 upgrade
Could you please guide me step by step to install 2010 RX350 passenger side view monitor. I have bought OEM side camera and steering button but I don't know how to connect them. Please guide me the wire. Where to start and where to end? I really need your help. Thanks for your respond.
Thread
Thread Starter
Forum
Replies
Last Post
Curated Content Editor
Car Chat
0
11-11-16 03:00 PM