Would this fit?
#1
Lexus Test Driver
Thread Starter
Join Date: Aug 2007
Location: Western Australia (Australia)
Posts: 1,254
Likes: 0
Received 15 Likes
on
11 Posts
Would this fit?
This lip is installed on an RX400 Hybrid bumper and was wondering if it would fit a non-hybrid bumper (i.e. 2004 RX330)? I am not sure who makes the lip and I do not have any other pictures of it. The lower part of the bumpers on all the 2nd gen RX's look to be the same, but the real question is are they? Also is this an OEM lip from Toyota or another manufacturer? Any help would be appreciated.
#5
Lexus Test Driver
Thread Starter
Join Date: Aug 2007
Location: Western Australia (Australia)
Posts: 1,254
Likes: 0
Received 15 Likes
on
11 Posts
I am trying to find a lip kit for the front of the RX that meets the following requirements:
* It is not a big lip and is about in line with the OEM black sides
* Is not expensive
* Will look good on the front of the car
* Don't really want to buy a full lip kit as I plan to have the OEM sides painted at some point.
The only one that I have come across that looks good and meets most of these requirements is the Rojam lip kit. However that is going to cost (here in Australia) $650 to be delivered to Australia and then to ship from the east coast to the west coast another $150-$200. I can buy a full kit for that!
This is the Rojam
This is a no-named brand
- ignore the markers
I mean another option would be to buy a 400h bumper (if it fits on the RX330) and then get that Wings West lip kit (or just get the bumper and paint the black part). I can get a front 400h bumper at quite a cheap price.
* It is not a big lip and is about in line with the OEM black sides
* Is not expensive
* Will look good on the front of the car
* Don't really want to buy a full lip kit as I plan to have the OEM sides painted at some point.
The only one that I have come across that looks good and meets most of these requirements is the Rojam lip kit. However that is going to cost (here in Australia) $650 to be delivered to Australia and then to ship from the east coast to the west coast another $150-$200. I can buy a full kit for that!
This is the Rojam
This is a no-named brand
- ignore the markers
I mean another option would be to buy a 400h bumper (if it fits on the RX330) and then get that Wings West lip kit (or just get the bumper and paint the black part). I can get a front 400h bumper at quite a cheap price.
#6
Lexus Test Driver
Thread Starter
Join Date: Aug 2007
Location: Western Australia (Australia)
Posts: 1,254
Likes: 0
Received 15 Likes
on
11 Posts
Of course the RX400H bumper wouldn't work on the RX330's due to a difference in the design with the bonnet. The RX330 (or 350) bumpers have an indent for air under the grill, where the 400h doesn't. It is straight through there, so as far as air flow is concerned I don't want to tempt fate. Back to looking for a decent and afforable lip. Unless of course this is just an opening to open the bonnet??
Trending Topics
#8
Lexus Test Driver
#9
Lead Lap
iTrader: (10)
Just buy the Rojam.
You gotta pay to play - sorry. This couldn't be truer with body parts.
Buy the ****ty replica, the bodyshop will make up for the 650$ cost with hours of getting it to fit/mount it. Let alone paint, if there's a big difference in price, then its made from fibreglass; it will be wavy, the paint will be ****ty and prone to cracking with little rock chips.
You gotta pay to play - sorry. This couldn't be truer with body parts.
Buy the ****ty replica, the bodyshop will make up for the 650$ cost with hours of getting it to fit/mount it. Let alone paint, if there's a big difference in price, then its made from fibreglass; it will be wavy, the paint will be ****ty and prone to cracking with little rock chips.
#11
Driver
I've got to agree with infinrx - it looks too busy. Every aperture is different from every other one - there's no unity or harmony in the design.
Re the cost of the Rojam - why have it delivered in the ES then shipped to Perth? Couldn't you get it sent straight here for the same price as ES, then not have to pay extra to get it across the Nullarbor?
Re the cost of the Rojam - why have it delivered in the ES then shipped to Perth? Couldn't you get it sent straight here for the same price as ES, then not have to pay extra to get it across the Nullarbor?
#12
Lexus Test Driver
Thread Starter
Join Date: Aug 2007
Location: Western Australia (Australia)
Posts: 1,254
Likes: 0
Received 15 Likes
on
11 Posts
The main reason it's being done through a group that's does the Yahoo auctions and they are based in Melbourne. Trying to actually get hold of Rojam themselves has been let's say testing. I am still checking the auctions to see if I can find a better price to get it shipped direct to the West rather than having it go to the East first then to the west.
Thread
Thread Starter
Forum
Replies
Last Post
draco
RX - 2nd Gen (2004-2009)
2
05-24-11 07:25 AM