Knock sensor nightmare
03-08-15, 03:41 AM
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2014
Location: west virginia
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Knock sensor nightmare
here is my problem I have a 99 rx 300 I had the codes scanned and both knock sensors are reading bad. But I cannot find the right knock sensor everyone I buy or look at does not have the right plug on it for the wires any help would be grateful
03-08-15, 08:14 AM
#2
Need your VIN or at least build date. OE only on these parts. Probably want to replace the wiring sub harness while you are in there too (assuming it's replaceable on the early cars).
89615-12040 (01/1998 - 07/1999)
89615-12090 (08/1999 - )
89615-12040 (01/1998 - 07/1999)
89615-12090 (08/1999 - )
Last edited by carguy07; 03-08-15 at 08:17 AM.
03-13-15, 10:07 PM
#4
Moderator
03-13-15, 11:48 PM
#5
Driver School Candidate
Knock sensors at good price
Use the part numbers given by the threads above to search for sellers on eBay. I got Denso OE brand sensors for about $100.00 for two. Have proven to be excellent. My vehicle is also a 1999 RX300.
Last edited by Nick26; 03-14-15 at 12:27 AM.
03-14-15, 04:05 AM
#6
As best I can tell you want 89615-12040 x2 for the sensors and 82219-07010 for the harness.
Try to double check that harness # though. Not 100% sure on that one.
Try to double check that harness # though. Not 100% sure on that one.
Last edited by carguy07; 03-14-15 at 04:12 AM.
Thread
Thread Starter
Forum
Replies
Last Post
