Need advice on my 99 RX300
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2012
Location: VA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Need advice on my 99 RX300
I've been reading the helpful posts on here for years, but now I have a question of my own.
Last week I pulled codes 1133 and 1354. I replaced the a/f sensor (front side) and eliminated 1133. To tackle 1354, I checked out the OCV and cleaned the OCV filter. I cleared the codes and took the car for a test drive. Was 10 minutes in when the CEL came on again, had random misfiring causing a studdering in acceleration, and the brakes got stiff.
Ran another diagnostic check. Now I have gone from just a 1354 to reading: 0300, 0302, 0304, 0306, and 1354.
Suggestions are fully encouraged, and diagrams/pics are welcomed. Thanks!
Last week I pulled codes 1133 and 1354. I replaced the a/f sensor (front side) and eliminated 1133. To tackle 1354, I checked out the OCV and cleaned the OCV filter. I cleared the codes and took the car for a test drive. Was 10 minutes in when the CEL came on again, had random misfiring causing a studdering in acceleration, and the brakes got stiff.
Ran another diagnostic check. Now I have gone from just a 1354 to reading: 0300, 0302, 0304, 0306, and 1354.
Suggestions are fully encouraged, and diagrams/pics are welcomed. Thanks!
#2
Driver School Candidate
Thread Starter
Join Date: Mar 2012
Location: VA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I should also mention that the coils are in working order. Therefore, I think I can eliminate the codes 0302, 0304, 0306 as being related to something else. Where do I look next?
#4
thomas.... are the 1354 codes related to the OCV...the reason i ask.. is i am tracking down a similar problem ive posted a few threads down about urgent help.... i have a 0172, along with the 300,302,304,306 this person mentioned..
Cheers
Cheers
Thread
Thread Starter
Forum
Replies
Last Post
ZeekGS300
RX - 1st Gen (1999-2003)
7
11-28-11 07:26 AM
iamgg63
RX - 1st Gen (1999-2003)
1
12-06-10 08:12 PM