Yes, 20" Venza wheels fit - pics
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2010
Location: AZ
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Yes, 20" Venza wheels fit - pics
Hi, Im new to this forum but a long time Toyota/Lexus guy. I have owned many Toyota products and have been involved in older Landcruisers for quite some time. I am somwhat active over in that forum. Now that I have purchased this 00 RX, Im enjoying it very much and the cruiser seems to be spending alot of time in the garage
I found that these wheels fit one day on my wife's 2002 highlander when there was a set of P24550r20 tires mounted on the 20" Venza rims sitting for sale at the dealership. This is the stock optional set up for Venza's. On a whim, I tried them on knowing the RX and Highlander chassis is challenging for wheel fitment from the calipers up front to the strut seat in the rear rubbing tops of tires.
To my suprise, they fit! They do not rub anywhere at all. They bolt right on , no spacers or grinding.Upon close inspection, they clear by slight margins in every aspect. No rubbing even in the wheel wells at full lock. It is a big as you can possibly get in every dimension without rubbing.
So...when I recently purchased a 2000 RX, I aquired another set and put them on. They are sporty yet tastefull and do not stick out. They fil out the fenderwell without protruding past it. The vehicle handles and even (to my suprise based off the shorter sidewall) ride better.
I just wanted to pass this info along. There are some Venza takeoffs out there that people cant sell because no one thinks they fit anything (Even Rav4's need spacers with these wheels). Deals can be had.
I found that these wheels fit one day on my wife's 2002 highlander when there was a set of P24550r20 tires mounted on the 20" Venza rims sitting for sale at the dealership. This is the stock optional set up for Venza's. On a whim, I tried them on knowing the RX and Highlander chassis is challenging for wheel fitment from the calipers up front to the strut seat in the rear rubbing tops of tires.
To my suprise, they fit! They do not rub anywhere at all. They bolt right on , no spacers or grinding.Upon close inspection, they clear by slight margins in every aspect. No rubbing even in the wheel wells at full lock. It is a big as you can possibly get in every dimension without rubbing.
So...when I recently purchased a 2000 RX, I aquired another set and put them on. They are sporty yet tastefull and do not stick out. They fil out the fenderwell without protruding past it. The vehicle handles and even (to my suprise based off the shorter sidewall) ride better.
I just wanted to pass this info along. There are some Venza takeoffs out there that people cant sell because no one thinks they fit anything (Even Rav4's need spacers with these wheels). Deals can be had.
#3
Driver School Candidate
Thread Starter
Join Date: Nov 2010
Location: AZ
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Camelback Toyota , but they dont have anymore take offs left over. Id call around the different dealers in the valley and see if they have any sets. Ive also seen several sets on Craigslist too.
Venzas also come with 19" set ups that would fit fine as well.
Venzas also come with 19" set ups that would fit fine as well.
Trending Topics
#9
Driver School Candidate
Thread Starter
Join Date: Nov 2010
Location: AZ
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Thanks everyone for the feedback. <cheers>
#14
Driver School Candidate
Thread Starter
Join Date: Nov 2010
Location: AZ
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Ill never tell...
But, I can get someone a set for $900.00 if theyre interested - tires and wheels - no miles on them, brand new. Includes lug nuts. Local only.
But, I can get someone a set for $900.00 if theyre interested - tires and wheels - no miles on them, brand new. Includes lug nuts. Local only.