lane change blinker upgrade
#16
Racer
Does anyone know if Tap Turn works on an 2013 RX350? I've read all the posts but am not clear on that.
Websites shows: 450h 2009 and newer.
http://www.autowindow.com/install-instructions
Thank you!
Websites shows: 450h 2009 and newer.
http://www.autowindow.com/install-instructions
Thank you!
#19
Driver School Candidate
Sort of unrelated, however there are other LED only relays that work w LED's however I've heard that the LED's do not flash when locking/unlocking the car. CUrious to know if you have installed LED bulbs in your turn signals and if so, do your blinkers work when locking/unlocking?
#20
Racer
Sort of unrelated, however there are other LED only relays that work w LED's however I've heard that the LED's do not flash when locking/unlocking the car. CUrious to know if you have installed LED bulbs in your turn signals and if so, do your blinkers work when locking/unlocking?
#22
FYI for anyone changing the rear amber turn signal to LED. I just replaced my 2013 RX with V3 Triton and I did not get any hyper blinking so I did not have to install a new flasher relay.
#23
(An additional incandescent 1136 lamp in the light bar with the OEM front and rear lamps also continues normal operation.)
#25
When the front LEDs are installed the total load may not be enough for the regular turn signal blinker to operate normally.
Last edited by RobertGift; 06-29-16 at 07:41 AM.
#26
#27
Just to let everyone know. The TapTurn will work on the 2013 RX350. I just put one on mine and it works perfectly. Thanks Droid13, the pictures really helped. If you want to remove the whole trim panel, the following U-tube video will help. I'm not sure its necessary but I did.
#30
Driver School Candidate
2012 rx350
Awesome video! thanks for going through that for all of us!! I just upgraded all my exterior lights to LED and needed to replace the flasher for the decreased load on the front and rear flashers. VLEDS is a great place to purchase all the bulbs!