Help with air/fuel sensor wiring diagram
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2013
Location: AL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Help with air/fuel sensor wiring diagram
I have a 2007 RX 350 and after a lot of pain and agony, found that the blue wire going to the B1S1 a/f sensor was broken about 8 inches from the connector. I figured it would be easy enough to splice it back together, but putting a meter on the end going back into the harness, I get nothing. I was thinking since the code it was throwing had to do with the heater, there would be a 12V on it. Can someone tell me what this blue wire's function is and where the other end is so I can check the continuity? Thanks for your help!
#2
Driver School Candidate
Thread Starter
Join Date: Sep 2013
Location: AL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
After checking the good air/fuel sensor, I'm getting 12V, nothing, 3.3 and 2.9v. So, I'm guessing this blue wire goes back to the computer for a signal or something...
Thread
Thread Starter
Forum
Replies
Last Post