RX330 Panel Button Corruption
#17
Driver School Candidate
Thread Starter
Join Date: May 2009
Location: AZ
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
#18
Driver School Candidate
Join Date: Sep 2011
Location: N/A
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
sorry, but i have to bump this thread
did you guys find a solution
if the solution was from the dealer what have they done? parts replacement? or simple reprograming using a disc they own that is inserted in the navigation computer
Thanks
did you guys find a solution
if the solution was from the dealer what have they done? parts replacement? or simple reprograming using a disc they own that is inserted in the navigation computer
Thanks
#21
Driver School Candidate
Join Date: Jun 2004
Location: Canada
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RX330 Windshield Washer Winter problem
In cold weather -12C, if car parked outside overnight, no washer fluid would come out from the nozzles. The car went into an underground garage and parked for a couple of hours, everything works fine.
Any suggestions?
Any suggestions?
#23
Driver School Candidate
Thread Starter
Join Date: May 2009
Location: AZ
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
#25
I did the same thing. This is my post from another thread describing how i fixed it.
"I don't know if you guys ever figured out a solution to this. But I did the same thing and fixed it in just a few minutes.
First i went through all the buttons on the dash board to figure out which one was now the "Info" button. On mine it ended up being the "Winshield Defroster" button. I then held down the "Windshield Defroster" button and did the headlight trick to get into the service menu.
Once I was there the touch screen was messed up in that it was inverted. If I wanted to press a button in the top left corner of the screen I would have to press the bottom right corner of the screen to access that button. Once I figured out that trick I was able to press the section of the screen that corresponded to the button I wanted to press.
So now that I knew how to get into the service menus and where to touch the screen I went in to change the model type back.
I accessed the first level of the service menu and then went to the second level. I changed the vehicle type until it said "900N4WD" (you will want to do "900N2WD" if you have the 2WD RX Hybrid) then I pressed set and exited the menu.
All the buttons went back to normal and I vowed to never go into that menu again."
"I don't know if you guys ever figured out a solution to this. But I did the same thing and fixed it in just a few minutes.
First i went through all the buttons on the dash board to figure out which one was now the "Info" button. On mine it ended up being the "Winshield Defroster" button. I then held down the "Windshield Defroster" button and did the headlight trick to get into the service menu.
Once I was there the touch screen was messed up in that it was inverted. If I wanted to press a button in the top left corner of the screen I would have to press the bottom right corner of the screen to access that button. Once I figured out that trick I was able to press the section of the screen that corresponded to the button I wanted to press.
So now that I knew how to get into the service menus and where to touch the screen I went in to change the model type back.
I accessed the first level of the service menu and then went to the second level. I changed the vehicle type until it said "900N4WD" (you will want to do "900N2WD" if you have the 2WD RX Hybrid) then I pressed set and exited the menu.
All the buttons went back to normal and I vowed to never go into that menu again."
#26
Driver School Candidate
Thread Starter
Join Date: May 2009
Location: AZ
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the suggestions, although none have worked. It's been 4 years now and I suppose I need to trade this car off. Not thrilled that someone else will get stuck with it. Any last minute ideas?
#27
Buttons set for wrong vehicle
Michael
#28
SOLVED: We swapped out the display unit, the one above the radio/DVD and the 'scrambled' buttons and display problem was resolved. I was surprised, but it did solve the problem. The button info and screen stuff is NOT stored in the map nav DVD unit or the computer but in the display unit. Go figure.
#29
Solved: Swapped out display unit
SOLVED: We swapped out the display unit, the one above the radio/DVD and the 'scrambled' buttons and display problem was resolved. I was surprised, but it did solve the problem. The button info and screen stuff is NOT stored in the map nav DVD unit or the computer but in the display unit. Go figure.
#30
Driver School Candidate
Join Date: Dec 2017
Location: Essex
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts