Will Gen3 RX350 19" wheels fit the Gen2 RX350?
#1
Intermediate
Thread Starter
Will Gen3 RX350 19" wheels fit the Gen2 RX350?
Hi guys,
Looking at a set of 19" from the Gen 3... 19x7.5 +35 114.3PCD.
Currently i've got the 18" from the Gen 2.. which is 17x7 +35 114.3PCD.
Do you reckon it'll clear.. i'm guessing it'll be okay, how about caliper clearance?
Cheers
Howie
Looking at a set of 19" from the Gen 3... 19x7.5 +35 114.3PCD.
Currently i've got the 18" from the Gen 2.. which is 17x7 +35 114.3PCD.
Do you reckon it'll clear.. i'm guessing it'll be okay, how about caliper clearance?
Cheers
Howie
#5
Intermediate
Thread Starter
Currently the tires on the 18x7 are maxxis 235/55r18. I'm most likely going 255/50/r19 which is according to the tyre calculator less than 1% of rolling diameter of the stockies... Can anyone verify that this will work?
#6
Intermediate
Thread Starter
Trending Topics
#8
Intermediate
Thread Starter
Yep, 255/45 should be within spec.. i've seen a Kluger (Highlander) running them on 19's no problems.
P.s. Sewellparts having a close out sale on TTE Springs for the RX.. $95 bucks
P.s. Sewellparts having a close out sale on TTE Springs for the RX.. $95 bucks
#9
Driver School Candidate
Join Date: Mar 2010
Location: CA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
My answer is yes, they fit. I have a brand new set of 2011 RX350 19 x 7.5" takeoff wheels with Michelin tires (235/55/19) and I just tested fitted them to our 2008 RX400h. There is about a 2-3mm clearance of the front brake calipers but they do bolt on just fine.
I will have the TPMS sensors removed from the stock 18" x 7" hybrid wheels and put on the 19" wheels in a few weeks. Can't wait!
I will have the TPMS sensors removed from the stock 18" x 7" hybrid wheels and put on the 19" wheels in a few weeks. Can't wait!
Last edited by phantomdg; 06-17-11 at 10:06 PM.
The following users liked this post:
Felix (01-13-20)
#14
Driver School Candidate
#15
Driver School Candidate