Engine Cover Removal
#1
Advanced
Thread Starter
Engine Cover Removal
Folks, I am having a real frustrating time trying to get the engine cover off of my 330 - to take it off of the 300 is simple, but there is an additional attachment in addition to the three screws on the front top side of the cover.
It is attached underneath, and unlike the 300, you cannot unscrew the "L" logo and get it off. What is up with this????
Thanks,
JBL
It is attached underneath, and unlike the 300, you cannot unscrew the "L" logo and get it off. What is up with this????
Thanks,
JBL
#5
Lexus Champion
#6
Advanced
Thread Starter
JBL
Last edited by jbl-1985; 04-26-10 at 12:52 PM.
Trending Topics
#8
Lexus Test Driver
Join Date: Mar 2004
Location: Wisconsin
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts
I am a great one for a clean engine compartment too, wash the whole area in the spring after all the salt spray is done splashing. Never thought to take off the cover to clean under it. As long as u say it was clean underneath I don't think I will take mine off
#9
Advanced
Thread Starter
Keep in mind though, the most probable reason mine is so clean is because believe it or not, even though I live in Pittsburgh, my '05 has never seen snow or salt...just rain if anything. It's a weekend and vacation car with only 30k on it. As a result, it still looks showroom like...
If you use yours as an everyday ride, you more than likely will have some blemishes under the cover.
JBL
If you use yours as an everyday ride, you more than likely will have some blemishes under the cover.
JBL
#10
Lexus Champion
No, Grasshopper, the 3MZ-FE Engine is a beautiful sight! The reason I wanted to take it off was really to see how much grime and dirt has accumulated and happy to say that there really is none. Well, my '05 only has 30k miles on it so that would explain a lot of that. As a kid I was always one to take the cover off of my toys and see what lurks within...the only thing that has changed between then and now are the toys...
JBL
JBL
#11
Bringing this thread back to life.. Just threw a code to replace the number 6 ignition coil on my 07 RX350. I understand how to change the coil but not how to get the cover off. Sounds like a simple pull and tug will do the job..
Good stuff that search feature!!
Good stuff that search feature!!
Thread
Thread Starter
Forum
Replies
Last Post