Need F/R Rotors and pads
#1
Rookie
Thread Starter
Join Date: Mar 2002
Location: New York
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Need F/R Rotors and pads
Hi,
I have a 1999 RX300 AWD with a warped rear rotor.
I couldn't find anybody who sells decent rotors. Brembo don't make them and I heard TRW is the onlt one and they only make the Front Rotors only. I heard bad thing about some OEM that is made from China. Does anyone know where I can get these rotors? I don't need them xdrill, but maybe slotted or nothing just OEM.
Thanks
Frankie
I have a 1999 RX300 AWD with a warped rear rotor.
I couldn't find anybody who sells decent rotors. Brembo don't make them and I heard TRW is the onlt one and they only make the Front Rotors only. I heard bad thing about some OEM that is made from China. Does anyone know where I can get these rotors? I don't need them xdrill, but maybe slotted or nothing just OEM.
Thanks
Frankie
#3
www.rockauto.com lists Wagner and Raybestos rotors for it. Between $45 to $55 for the rear. Probably equivalent to OEM or slightly better. I would choose Raybestos over Wagner....I use the high end Raybestos pads on all my vehicles now.
#4
Rookie
Thread Starter
Join Date: Mar 2002
Location: New York
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Finally decided
Hi and thanks for all the info,
I finally decided what I am going to buy. I put an order to IROTORs.com and order the following:\
1999 Lexus RX300 AWD
F/R EMC blank rotors - $190 for all - I live in NY with a lots of stop and go. They recommended the blanks which is fine. I don't see any benifit on the xdrill/slotted in city driving anyway.
F/R Aixxis Metal Master Pads - $85 - That's the onlt one they sell and people say they're pretty good.
Shipping to NY - $35 - reasonable.
Thanks to all again.
This will be a DIY with a friend.....Wish me luck.....First time DIY on my car............
Regards,
Frankie
I finally decided what I am going to buy. I put an order to IROTORs.com and order the following:\
1999 Lexus RX300 AWD
F/R EMC blank rotors - $190 for all - I live in NY with a lots of stop and go. They recommended the blanks which is fine. I don't see any benifit on the xdrill/slotted in city driving anyway.
F/R Aixxis Metal Master Pads - $85 - That's the onlt one they sell and people say they're pretty good.
Shipping to NY - $35 - reasonable.
Thanks to all again.
This will be a DIY with a friend.....Wish me luck.....First time DIY on my car............
Regards,
Frankie
Thread
Thread Starter
Forum
Replies
Last Post
rclab1
SC430 - 2nd Gen (2001-2010)
2
04-03-07 10:54 AM