How to adjust your fog light beam height
#1
Lead Lap
Thread Starter
How to adjust your fog light beam height
I've seen a few discussions about how low the fogs on our cars are aimed from the factory. After lowering my car, I searched both the forums and the user manual for how to adjust the fogs but came up empty.
If your car is lowered, you will have to jack up the front end of the car. Under the front end there are holes on each side underneath the fog light area. Shine a light through the hole and find the small gear. Use a Philips screwdriver to turn the gear. Clockwise=up, counter clockwise=down.
If your car is lowered, you will have to jack up the front end of the car. Under the front end there are holes on each side underneath the fog light area. Shine a light through the hole and find the small gear. Use a Philips screwdriver to turn the gear. Clockwise=up, counter clockwise=down.
Thread
Thread Starter
Forum
Replies
Last Post