Help identifying a Supra diff?
#1
Rookie
Thread Starter
iTrader: (1)
Join Date: Aug 2012
Location: Alabama
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Help identifying a Supra diff?
I bought what I was told was a gen IV Auto Trans Supra Torsen Diff -which I was told was a direct swap into the SC300/400 differential. However, when I tried to install the ring gear from the SC pumpkin -the ID of the ring gear was too large and the bolt circle was also too large. It is not enough to be the next size up Supra Diff and so I am beginning to wonder if it was even a Supra diff to begin with. Please help identify if you have the experience.
outside flange Ø = 182mm
ring gear press fit Ø = 126mm
bolt hole Ø = 11.5mm
bolt circle Ø = 160mm
Photos:
It does seem to look amazingly like this one:
http://www.ebay.com/itm/JDM-TOYOTA-SUPRA-MK4-ARISTO-TURBO-LSD-DIFFERENTIAL3-7-JZA80-MK4-2JZGTE-3-7-/261708267413?hash=item3cef073f95&vxp=mtr
outside flange Ø = 182mm
ring gear press fit Ø = 126mm
bolt hole Ø = 11.5mm
bolt circle Ø = 160mm
Photos:
It does seem to look amazingly like this one:
http://www.ebay.com/itm/JDM-TOYOTA-SUPRA-MK4-ARISTO-TURBO-LSD-DIFFERENTIAL3-7-JZA80-MK4-2JZGTE-3-7-/261708267413?hash=item3cef073f95&vxp=mtr
Last edited by UZinator; 03-25-15 at 06:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
UncleRico
GS - 1st Gen (1993-1997)
3
03-21-14 10:27 AM