92 nat bogging issues
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2014
Location: illinois
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
92 nat bogging issues
I have a 92 sc, with a recently added turbo kit. Now I'm having some issues. Car revs up fine until 5 grand and then will just sit there and not go past it. Anyone ever have a problem like this? My downpipe didn't have the right 02 bungs so both are disconnected at the moment. Could this be my issue? Or any other ideas. Everything else is stock besides the turbo kit. Wasn't doing this before the install.
#2
Racer
iTrader: (7)
I have a 92 sc, with a recently added turbo kit. Now I'm having some issues. Car revs up fine until 5 grand and then will just sit there and not go past it. Anyone ever have a problem like this? My downpipe didn't have the right 02 bungs so both are disconnected at the moment. Could this be my issue? Or any other ideas. Everything else is stock besides the turbo kit. Wasn't doing this before the install.
I would say get everything plugged in like it should be first. No need to go chasing rabbits when the car isn't put together yet.
#5
re
check you neutral safety switch. If the loop for that switch is close which means engaged the car will not rev above 5k start there. This is the reason for guys going from auto to manual have to engage the neutral park switch to start the car but have to disengage the switch to let the engine rev past 5k I hope this help
Last edited by jaymil31; 08-29-14 at 07:39 PM. Reason: missing words
Thread
Thread Starter
Forum
Replies
Last Post
GoCarSc300
Performance & Maintenance
10
10-08-07 03:38 PM