1uzfe power steering question.
#1
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: ca
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
1uzfe power steering question.
i swapped a 1uz into my nissan truck and used 240sx front steering and suspension, i have an ls400 power steering pump plumbed to the 240sx steering rack through a cooler.
after a few hot laps the power steering becomes super hard, almost like i have no power steering at all.
i already plan on upgrading to a larger cooler, but I'm also wondering if anyone knows where i can source a smaller PS pump pulley?
or if there are any other things you would suggest?
picture for enjoyment.
after a few hot laps the power steering becomes super hard, almost like i have no power steering at all.
i already plan on upgrading to a larger cooler, but I'm also wondering if anyone knows where i can source a smaller PS pump pulley?
or if there are any other things you would suggest?
picture for enjoyment.
#5
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: ca
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
there is obviously a compatibility issue between the rack and pump, and I'm assuming the pressure and volume from the ls400 pump isn't up to the task. hence why I'm asking for a smaller pulley for the pump. also if anyone has any links on how to increase the volume such as resizing the ports on the 1uz pump or any other options.
Thread
Thread Starter
Forum
Replies
Last Post