a few performance questions, 1uzfe.
#1
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: ca
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
a few performance questions, 1uzfe.
sorry if these questions have been covered before, i did try and search but to no avail.
1. will a 2uzfe intake manifold fit on a 1uzfe? id like this because of the TB placement for my application, and if it does fit what things will i have to modify to make it happen.
2. are there any larger throttle body options?
3. how far can i advance timing with a safc tuner?
4. and lastly, has anyone run e85 on an NA build?
thanks in advance
1. will a 2uzfe intake manifold fit on a 1uzfe? id like this because of the TB placement for my application, and if it does fit what things will i have to modify to make it happen.
2. are there any larger throttle body options?
3. how far can i advance timing with a safc tuner?
4. and lastly, has anyone run e85 on an NA build?
thanks in advance
#2
Lexus Test Driver
iTrader: (6)
Join Date: May 2010
Location: Colorado Springs, CO
Posts: 1,442
Likes: 0
Received 4 Likes
on
4 Posts
no, unless you changed heads etc etc etc
no, unless you go custom itb's
advance timing and safc.... don't
yes but with itbs in an s14.
i've googled all of this before except the timing part..... hmm, you could have too!
no, unless you go custom itb's
advance timing and safc.... don't
yes but with itbs in an s14.
i've googled all of this before except the timing part..... hmm, you could have too!
#3
Driver School Candidate
Thread Starter
Join Date: May 2013
Location: ca
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
so you cannot advance timing on a 1uzfe with an safc?
and the e85 question was pointed to just the 1uzfe not a KA motor, i wanted to hear peoples results.
by chance are you the guy with the black sc400 in drift colorado?
Thread
Thread Starter
Forum
Replies
Last Post
twizted
SC400 / 300 Classifieds
19
06-21-09 05:02 AM